Deltaboy1984
Member
Test it with snap caps and make a deal!
Pawn Shop Taurus 85
- Thread starter Johnnyb8612
- Start date
- Status
NMGonzo
Member
SOUNDS LIKE A NO BRAINIER=====PASS on it======
then send me the location of the gun so i can buy it
This person is trying to rip you off!
Send the location to me so I can make sure that chevelle does not get it.
Fumbler
Member
In case the original poster didn't catch this:
You don't need snap caps. Snap caps won't tell you if the gun's out of time or has endshake.
IMO if it checks out okay and I could talk them down to around $200-220 then I'd consider it a fair deal.
There's nothing wrong with the Taurus 85. I have an 85 Ultra-lite and a S&W 637. Honestly the extra cost of the 637 doesn't buy you much more quality.
http://www.thehighroad.org/showthread.php?t=1430
You don't need snap caps. Snap caps won't tell you if the gun's out of time or has endshake.
IMO if it checks out okay and I could talk them down to around $200-220 then I'd consider it a fair deal.
There's nothing wrong with the Taurus 85. I have an 85 Ultra-lite and a S&W 637. Honestly the extra cost of the 637 doesn't buy you much more quality.
thebaldguy
Member
I got an almost new 85 ten years ago for $200. It has worked well. Inspect it and if it's ok I say go for it.
weregunner
Member
Taurus does make very good snub revolvers.
This year I started a snub collection of Taurus 441 and 431s in .44 Special to go along with the other Taurus snubs I own.
1- Taurus 327, .327 Federal magnum
1-85CH
2- Taurus 6 shot 856s. These are on a 85 frame.
1 Rossi 462 in .357 magnum.
These are all durable and reliable.
This year I started a snub collection of Taurus 441 and 431s in .44 Special to go along with the other Taurus snubs I own.
1- Taurus 327, .327 Federal magnum
1-85CH
2- Taurus 6 shot 856s. These are on a 85 frame.
1 Rossi 462 in .357 magnum.
These are all durable and reliable.
MCgunner
Member
I'd try to talk 'em down a bit, then buy it if it checks out inspection. Always inspect any revolver before purchase, but now days, frankly, I have more trust in used, especially from Smith and Wesson lately for several reasons. But, I'd check it out and follow the check list in the sticky above.
I have had in my carry rotation, a Taurus 85SSUL for over a dozen years bought new in 96 when I got my permit. It's a fine shootin' gun with the best out of the box trigger I've ever owned, bar none, and that includes Smiths.
I have had in my carry rotation, a Taurus 85SSUL for over a dozen years bought new in 96 when I got my permit. It's a fine shootin' gun with the best out of the box trigger I've ever owned, bar none, and that includes Smiths.
Mr. Ford
Member
I found a used up a 85ch in a local gun shop for $175 a couple of years ago.
For $200, I'd buy it.
For $200, I'd buy it.
Pawn shops are a gamble.I bought a Taurus .44 Mag. Tracker
Like new at a local pawn shop.I visited many times looking at it
each trip.All was tight on the gun.A paper thin gap between the
cylinder and barrel was a key point to look at.The cylinder should not
touch the barrel nor should it have a lot of play in the cylinder.
I got a real good deal on it,due to it being on the shelf for awhile.
I've fired approx. 500 rounds through it with absolutely no flaws.
In your case,I think I'd pass.Strickly due to it haveing wear
signs.That's not good unless you know the owner and history of
the gun.My opinion.
Like new at a local pawn shop.I visited many times looking at it
each trip.All was tight on the gun.A paper thin gap between the
cylinder and barrel was a key point to look at.The cylinder should not
touch the barrel nor should it have a lot of play in the cylinder.
I got a real good deal on it,due to it being on the shelf for awhile.
I've fired approx. 500 rounds through it with absolutely no flaws.
In your case,I think I'd pass.Strickly due to it haveing wear
signs.That's not good unless you know the owner and history of
the gun.My opinion.
dogngun
Member
I have 6 S&W revolvers right now...and I carry a Rossi 462
that I bought used for $265. I'd jump on that Taurus in a minute. The warantee is on the gun, not the owner, and you probably won't need it.
Read the guideline sticky on buying a used revolver, bring cash, and buy it if you like it.
FWIW, I'd buy another used Rossi in a minute if I found another like mine...This is my 3rd and they have ALL been really well made, reliable and accurate.
mark
that I bought used for $265. I'd jump on that Taurus in a minute. The warantee is on the gun, not the owner, and you probably won't need it.
Read the guideline sticky on buying a used revolver, bring cash, and buy it if you like it.
FWIW, I'd buy another used Rossi in a minute if I found another like mine...This is my 3rd and they have ALL been really well made, reliable and accurate.
mark
straybullet
Member
- Joined
- Dec 9, 2010
- Messages
- 57
I bought an 85 for my wife years ago from a pawn, it fits her right and has been amazingly reliable. Just look over it well in advance.
Johnnyb8612
Member
Well, that was the thing, I went back and looked at it closely, and it just looks like it was very worn out. The bluing was rubbed off, and the innards looked like they'd been sandblasted and filled with grime. I was in the market for a 'happy gun' (you know, a gun you own because it instantly improves your mood to hold and shoot it?) didn't really care what action, caliber, etc, and this one just..didn't speak to me.
HOWEVER, a week ago I spotted a Mil-surp Czech Rep Cz-82 in 9mm Mak in very decent shape for $189, so I picked it up and racked the slide, and it was like meeting an old friend. Smooth, comfortable, balanced and solid. I walked out for $195.00 after taxes with the gun, FOUR mags, a holster and a bore brush, and I was/am a happy man. Thanks for the input, guys. Valuable info to be sure.
HOWEVER, a week ago I spotted a Mil-surp Czech Rep Cz-82 in 9mm Mak in very decent shape for $189, so I picked it up and racked the slide, and it was like meeting an old friend. Smooth, comfortable, balanced and solid. I walked out for $195.00 after taxes with the gun, FOUR mags, a holster and a bore brush, and I was/am a happy man. Thanks for the input, guys. Valuable info to be sure.
critter
Member
My wife carries a Taurus 85 (with a hammer) and it works out quite well.
ThomasT
Member
I have heard of of totin' a gun and a knife bit never a gun and a hammer. Remind me not to mess with her.
I have a blued steel 85 that has been as good as any gun I have ever owned. And I have shot quite a few +Ps out of mine. I have also owned several Taurus guns that didn't line up with the barrel. Taurus said they would repair them but I just sold them instead. I would buy another Taurus revolver but only if I could see it in person. No more buying them on line.
MCgunner
Member
Those eastern European Maks are steals! The CZ is really nice, if a might large for the caliber. I picked up a Radom (Polish) P64 a year ago for under 200 bills. It's about the size of a PPK, reminds me a lot of a PPK, all steel, very accurate, very reliable. I had to put springs in it and a guy sold me a really nice set of wood "Mareschal" (sp?) grips for it to make it more comfy to shoot. It's also in my carry rotation with the M85SSUL.
Anyway, for a "happy gun", you done REAL good.
Anyway, for a "happy gun", you done REAL good.
NMGonzo
Member
GREAT choice!
BrocLuno
Member
Yup - happy is good. If it doesn't speak to you, pass on it.
- Status