Scope Rings for a Bushnell Elite 3200 on a Savage

[bluerider450]

Any reccomendations on rings for a bushnell 3200 elite 10x40 mil dot on a savage model 10 .308? I know very little about optics and accessories. T

 

[Haxby]

Burris XT Bases. Or an EGW base if you want a one-piece. Burris XT rings, low.

 

[helotaxi]

The EGW base and Burris XTR rings is a nice combination (speaking from experience) but I recently bought a Weaver 1 piece base and like it better. It has a recoil lug that takes the recoil stress off the base mounting screws.

Another option that has worked well for me is Weaver 2-piece bases and Burris Signature Zee rings. Medium is the lowest height for these rings which makes the lower 2-piece bases important. Using those rings with something like the EGW 1-piece base leaves the scope way too high (again speaking from experience).

All of my decent-good scopes with 1" tubes are mounted with Burris Signature Zee rings. I've got four sets currently in use and 3 sets awaiting installation.

 

[Artpro]

Rings

Ditto on the use of Burris Signature Zee rings. No marring and they're self aligning.

 

[slowr1der]

I'd personally use Burris Signature Zee rings too.