There are quite a few to recommend. Here's mine: S&W 640. I had a 642 but it was too much recoil for me. If I carried in the "line of duty," and it had to be revolvers, I would carry a three-inch Smith or Ruger and the 640 as my backup. By the way, I have Crimson laser Grips that will be going on this 640 tonight. Had them on the 642 and sold them with the revolver. Should have kept them.
which concealed and what caliber
- Thread starter berettashotgun
- Start date
- Status
ATAShooter
Member
A S&W 637 in .38 spl with 158 or better +P will do the job you want.
May 29th, 2006, 10:02 AM #2
lyricsdad
wrote:"
I realize you said she needed to get a revolver, but you did reference pistols, so I'll assume a pistol is acceptable also. I think the Glock 19, or lock 26 would be good choices. Along those same lines in an alloy frame, I suggest looking at a S&W 3913 LS, or S&W CS9 ... both are 9mm. These are pretty small handguns ( 6-7/8" & 24.8 oz. and 6-1/4" & 20 oz.respectively). I think it certainly depends upon her hand size.The 9mm I consider much like a .38 +P.
If you really must have a revolver, I would certainly look at the 442, 442LS (though 15 oz. might be a point of contention ... depends upon the little lady) the S&W 638 looks much along the same lines, size and weight.
Those seem decent choices for the smaller, not as macho, of the species, but then who knows, a S&W 325PD in .45 ACP might be just the revolver for her (7-1/4" & 21.5 oz.).
Good luck in her search ....et us know what she picks.
lyricsdad
wrote:"
I realize you said she needed to get a revolver, but you did reference pistols, so I'll assume a pistol is acceptable also. I think the Glock 19, or lock 26 would be good choices. Along those same lines in an alloy frame, I suggest looking at a S&W 3913 LS, or S&W CS9 ... both are 9mm. These are pretty small handguns ( 6-7/8" & 24.8 oz. and 6-1/4" & 20 oz.respectively). I think it certainly depends upon her hand size.The 9mm I consider much like a .38 +P.
If you really must have a revolver, I would certainly look at the 442, 442LS (though 15 oz. might be a point of contention ... depends upon the little lady) the S&W 638 looks much along the same lines, size and weight.
Those seem decent choices for the smaller, not as macho, of the species, but then who knows, a S&W 325PD in .45 ACP might be just the revolver for her (7-1/4" & 21.5 oz.).
Good luck in her search ....et us know what she picks.
berettashotgun
Member
- Joined
- May 8, 2005
- Messages
- 1,149
Her job requirements include nice clothes, don't know about the jacket, she is sorta' tall, and lanky with broad shoulders.She ain't reading this
anyways~ the size NEEDS to be like the tarus 85, possibly bigger; but preferably as small as.. She has clearly stated that she requires above average accuracy (for her own peace of mind) and has no problem with the 38 loads- just since shooting 357 sig and 45acp realizes the importance of carrying as much as she can conceal and handle. Per legal requirements ( POS lawyers:banghead: ) she must carry a stone stock weapon with factory ammo. We might try something in 44spl- and the concealed hammer on those S&W pistols are OK with her. MAJIC- I don't claim to wear the pants 'round here- BUT - I don't have to disguise or sugar coat my concern about my wifes' safety. She wouldn't let me go to play in the sand dunes with my buddies (for a incredible amount of $$$$$) because of her fears- and I want her happy and safe. So she can come home and iron my shirts
BTW- the ruger is out- we have one, and also a 65,66,686. To big.
anyways~ the size NEEDS to be like the tarus 85, possibly bigger; but preferably as small as.. She has clearly stated that she requires above average accuracy (for her own peace of mind) and has no problem with the 38 loads- just since shooting 357 sig and 45acp realizes the importance of carrying as much as she can conceal and handle. Per legal requirements ( POS lawyers:banghead: ) she must carry a stone stock weapon with factory ammo. We might try something in 44spl- and the concealed hammer on those S&W pistols are OK with her. MAJIC- I don't claim to wear the pants 'round here- BUT - I don't have to disguise or sugar coat my concern about my wifes' safety. She wouldn't let me go to play in the sand dunes with my buddies (for a incredible amount of $$$$$) because of her fears- and I want her happy and safe. So she can come home and iron my shirts BTW- the ruger is out- we have one, and also a 65,66,686. To big.Jim Watson
Member
If the S&W 66 is too big, and a revolver is required, it sounds like she is going to be stuck with a J-Smith 5-shot. The best of the lot for actual shooting is the M-60 with 3" barrel and adjustable sights.
http://www.smith-wesson.com/webapp/...ted=tech&isFirearm=Y&parent_category_rn=15704
Will need a good holster for concealment and protection from snags on the draw and fraying of jacket lining.
All those extra compact hammerless snubbys are just going to be that much harder to get hits with.
http://www.smith-wesson.com/webapp/...ted=tech&isFirearm=Y&parent_category_rn=15704
Will need a good holster for concealment and protection from snags on the draw and fraying of jacket lining.
All those extra compact hammerless snubbys are just going to be that much harder to get hits with.
berettashotgun
Member
- Joined
- May 8, 2005
- Messages
- 1,149
Jim, that looks about right. Went to the website and looked around- have never REALLY looked at revolvers and like a bunch of them. Better keep her away from the 340pd- that's light http://www.smith-wesson.com/webapp/...ted=tech&isFirearm=Y&parent_category_rn=24807
FWIW I own a 340PD and find it very managable with Speer 135gr +P 38sp. The 357mag in the same make and weight leaves me with no accuracy after the 3rd or 4th shot.
If you are restricted to factory unmodified revolvers, consider the 327PD or the Taurus 45acp snubby.
If you are restricted to factory unmodified revolvers, consider the 327PD or the Taurus 45acp snubby.
Otherguy Overby
member
This is America
What??? Are you all a bunch of commies? There's only one true American gun for concealed carry: A model 29 Smith.
Do you feel lucky?
What??? Are you all a bunch of commies? There's only one true American gun for concealed carry: A model 29 Smith.
Do you feel lucky?
TOADMAN
Member
S&W Model 442/642/36..
Brian Williams
Moderator Emeritus
If a S&W 65 is too big, then I suggest S&W 640 in 357 if that is too much go for a 940 with polished charge holes and ammo that she knows works. A Ruger SP-101 3" in 357 or 9mm is a great gun also.
HankB
Member
Does "stone stock" include the grips?
If not, I'd suggest a pre-lock stainless J-frame .357 with Crimson Trace grips added.
If "stone stock" includes the grips, go with one of the J-frame offerings from S&W which include CT grips from the factory.
When I'm not toting something larger, I pocket-carry a 340SC (with CT305 grips) which I slicked up myself . . .
Of course, if she can conceal a K-frame, she should get a round-butt, pre-lock M66, which will be superior to any J-frame.
wheelgunslinger
Member
Hmmm...
I'd suggest a Dan Wesson .357, mainly because of the interchangeable barrels. It makes it easy to see what length is most easily carried concealed yet still be effective. A short barrel K frame isn't that hard to conceal.
Or
Might think about a hammerless .44 special in stainless. Or perhaps the Taurus 350 in either .45 Colt or .44 special.
Wanting a big bore that's concealable isn't impossible, but it presents a narrowed field. May need to make some compromises.
using a wheelgun doesn't really compromise you that much compared to an auto. You just practice a different set of skills. And you learn to make every shot count.
As far as reloads, I would recommend Safariland Comp II speedloaders for that particular chore, as well.
I'd suggest a Dan Wesson .357, mainly because of the interchangeable barrels. It makes it easy to see what length is most easily carried concealed yet still be effective. A short barrel K frame isn't that hard to conceal.
Or
Might think about a hammerless .44 special in stainless. Or perhaps the Taurus 350 in either .45 Colt or .44 special.
Wanting a big bore that's concealable isn't impossible, but it presents a narrowed field. May need to make some compromises.
using a wheelgun doesn't really compromise you that much compared to an auto. You just practice a different set of skills. And you learn to make every shot count.
As far as reloads, I would recommend Safariland Comp II speedloaders for that particular chore, as well.
Spend the $$ and find a Colt Magnum Carry...
or be reasonable and get a model 65 LadySmith
either in .357
or be reasonable and get a model 65 LadySmith
either in .357
Zundfolge
Member
If I had to CCW a wheelgun I want this one:
S&W 327 PC snubbie.
8 rounds of .357mag in a pretty compact package.
S&W 327 PC snubbie.
8 rounds of .357mag in a pretty compact package.
berettashotgun
Member
- Joined
- May 8, 2005
- Messages
- 1,149
Gotta work sat, but a 38+p/357 is all right. Now if I can just get one of those sweet smiths. She wants the smallest and we are going to try and look at a few small S&W revolvers this weekend. Gotta get the stuff sorted out in a few weeks, and think any of the S&W concealed pistols are going to work. If she ask if they come in colors I'm gonna giggle.
Second the
Mdl 65, 3" bbl if you find one. A 638 or 60 would be a better solution than a Taurus Mdl 85. I have one and prefer the S&W trigger. For the .38 I'm old school and like the 158 LSWHP. Growing up in Chicago the CPD used this round.
Mdl 65, 3" bbl if you find one. A 638 or 60 would be a better solution than a Taurus Mdl 85. I have one and prefer the S&W trigger. For the .38 I'm old school and like the 158 LSWHP. Growing up in Chicago the CPD used this round.
DaveTN
Member
An S&W 2 ½” Model 66 with 158 Federal Hydra-Shoks is a much firepower as cops carried for years. It is a proven performer, and controllable with heavy loads. It is not that much harder to conceal than a J frame.
I am recommending this assuming that she is in some type of work where her weapon being seen is no big deal.
If her work requires a revolver and you want the best it will be a Smith & Wesson; now it’s just a matter of which model.
I am recommending this assuming that she is in some type of work where her weapon being seen is no big deal.
If her work requires a revolver and you want the best it will be a Smith & Wesson; now it’s just a matter of which model.
- Status
