Recent content by 870

I run the Xtreme's with Bullseye and TiteGroup. Accurate enough for IDPA competition.

I prefer the cleaner lines that the magwell affords. I didn't need them, I wanted them.;)

Use a 6v lantern battery. http://www.pricecanada.com/p.php/Energizer-6-volt-alkaline-lantern-039800076632-606603/ 2 aligator clips (1 red, 1 black). http://www.radioshack.com/product/index.jsp?productId=2062227 2 co axial plugs - take a sensor to Radio Shack...

For the Mossy 500, you're SOL if it's a 5/6 shot. You need to get a new mag tube plus you will need different barrels. The 930 should be the same as the 935.

Try something like this. http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=5837&group_ID=601&store=&dir=catalog http://www.samstagsales.com/amf.htm#hook_adjust Use brass shims between the wrench and the nut.

Here's mine, a PGWDTI Timberwolf. www.pgwdti.com

It sounds good but I'm getting 1800 rounds/hr using a standard 1050 and a KISS Bulletfeeder. I'm not a commercial reloader.

P90shooter: Have your Dad check out the G21SF. I've always felt that the G21 felt like a brick in my hand - I like Glocks - but yesterdat I got to fire a G21SF, (SF = slim frame), I found it fit my hand very well and it felt like the recoil was a little less too.

Ever thought that they may have been busy with other customers orders?

Measure about 3" from the toe of the stock, cover with masking tape ans drill a hole 90 degrees to the stock a tad longer than the screw. Use a bar of soap on the threads to act as a lube then turn in to the hole - after removing the masking tape. The tape is used to help prevent...

I have shot my reloads in a G35 and a G17. My IPSC/IDPA 40S&W load is 4.6gr?TiteGroup under a 180gr Frontier CMJ.

FWIW The paper practice IDPA targets will screw you up because of the black border. I buy the practice targets for shooting LR rifle.

Nosler 3rd Edition 165gr = 40.0 - 44.0 168gr = No listing. Sierra's. 168gr HPBT = 38.8 - 43.6 Accuracy load = 42.0 165gr SBT = 38.3 - 41.3

Prior to 1992, the 30/06 was used too. I believe that it was the 1992 match that the 155gr was first used, so prior to that, anything went. Read Handloader magazine #152, July/August 1991 article - Loading for the Palma by G. Sitton.

You gotta quit using that cheap crap that Wally World et al sells. You know the stuff, with the aluminium or tin bases. Stick with the brass bases.