Recent content by b78-22250

Redding makes the best screw in dies to be had IMHO. I love my scale and powder measure. But the case trimmer was sub par and the boss press new was as loose as a $5.00 dollar honey on hay street.(yes I was in the 82 abn div at Ft Bragg) Gave them away and replaced them with a Rock Chucker and...

4570 +++ Reloader 7. Eight out of ten guns surveyed prefer rx7 with 400 gr bullits and short snouts.

I am with Popper. Size first charge after priming.

I have Hornady new dimension dies. I load 400 gr speer flat nose, and 300 gr sierra hp. Never a problem. I am shooting a NEF single shot so I do not crimp. Hope this helps.

I use the Sinclair arbor press and LE Wilson dies for 22-250.Nothing better IMHO.

+++ Starline brass.

lead bullits I told you so.

If you are having a problem with leading I think you need to read some information from the experts. You could have a hardness problem a size problem a lube problem a velocity problem ectera. Hardness problem It can get complicated. Ask the professionals who actually cast and shoot lead(...

I like my wilson hand dies with the micrometer top. Not real fast but I don't think they have any rivals in the accuracy department.JMOP.

accident. I started reloading shotgun shells back in 72. Got into metallic back in 84. I have had one painful mistake that lasted for years and was due to my own stubborness. I was reloading 38spl. and did not use enough lube. Well the case became stuck in the die no problem I will just knock...

moly coating Go to Varmit Al's site he has a very educational article on moly coating.

I use blackrocks method but use crazy cloth instead of steel wool. I have a tumbler but i load low volume precision and dont use the tumbler.

45/70 I have been loading for a NEF handi rifle for many years. I have two loads that perform great. 50.gr reloader7 300 gr. Sierra hp. Mostly starline brass and cci br2 primers. The second is the same except for a 400 gr Speer fp. My rifle did not like the 350's or the 3031 powder. The loads...

reloads 918v You seem to have doubts to the statements made by JC Witt. 70 reloads for a bottleneck cartridge. Please read varmit al's fitted case's.What JC said is the truth. Reloading has many depths how deep are you willing to go. read,research,reload,relax and learn. May all your groups be...

Trimmers Give a good look at Sinclair and the L E Wilson trimmers. None better or more accurate for the money.