Recent content by bandw1dth

When I was trying to duplicate Federal American Eagle M193 loads I ended up at 26.5gr of H335 with an OAL of 2.250". Sent from my iPhone using Tapatalk

Check out Inline Fabrications quick change system. Sent from my iPhone using Tapatalk

I think I remember reading about these a little while back. Main thing that stuck out for me was that they were crazy expensive, even more than their jacketed rounds. Which really made me scratch my head cause shouldn't coated lead rounds be cheaper to produce? I can't imagine that lead free...

When I was working up a load using H335 and 55gr FMJBTs, I initially had a very wide SD when I ran them over the chrono. After having listened to a few episodes on what Jeremy from the Reloading Podcast does for his F Class loads I decided to sort by case volume as I was already sorting by head...

I'm using the RCBS small base sizing die and the Hornady custom series seating die with the micrometer adjustment knob on the top. The RCBS sizing die works great on the single stage. Sent from my iPhone using Tapatalk

I also have taken to using lube with my handgun cases as well. Makes the whole press run so much smoother. When I load my range brass pickups I always use the Lee FCD. Absolutely love it. I can also agree with Dudedog regarding the Hornady PTX. Not a fan of it. As I'm also using the Hornady...

I'll check to make sure the shell plate is 0.125". I'm 100% certain the case 's are properly lubed, sizing them on the single stage is effortless. Had a he_ll of a time getting my reloads to chamber in all my ARs until I switched to the small base sizing die, so that's what I've stuck with ever...

Yeah I'm aware that the LNL is suppose to cam over and it does nicely. But the only way the small base die properly sizes a case is when the die is screwed in far enough so that you really have to apply some force to get it to cam over. Not like normal where there is just a bit of resistance to...

Thanks for the great insight!

Has anyone gotten the .223 RCBS Small Base sizing die to properly size cases without camover? I've been trying and trying but so far have come up short. The only way it will size the case properly so that it passes the case gauge is to run the die in far enough that there is significant cam...

Now that looks more like it. When I got my 700 free 115gr XTPs for buying the LNL AP + 2 die sets I settled on 1.100" Sent from my iPhone using Tapatalk

What caliber is your P320? Both my 9mm P320s full and compact came with #8 front and #8 rear. Generally it goes; #8 for both 9mm and 357Sig #6 for 40S&W and 45auto Looking down at your front sight there will be either a 6 or 8 to the left ( if I remember correctly) of the sight blade...

I've noticed that especially with the compact 320s they start running smooth after a couple hundred rounds. Sent from my iPad using Tapatalk

I feel ya there. I'm using Tapatalk and have found it to be lacking in several key areas. Specifically the search function. Sent from my iPhone using Tapatalk

Thanks so much Phlier! I've been searching on and off for a while now. Was beginning to think I had imagined the whole thing. Sent from my iPhone using Tapatalk