Recent content by cowboy68t1

Thank you I will give that a try. Have been fireforming using 45.9 grains of H322 firing 325 grain Hornady XTP bullets.

SSK Industries All ready contacted them. They don't have any current loads. They list loads for some odd ball weights, I believe are cast bullets.

Anyone have some current load data for a T/C Contender chamber for the 475JDJ. I'm using Hornady HP-XTP bullets. I'm using 325gr. bullets to fire form & 400 gr. bullets to hunt with.

Looking for any information on reloads using Hornady XTP-HP 325gr .475 dia bullets.

Looking for any information on reloads for a TC Contender Chambered in .475JDJ. Have found bullet weights from 275grs to 500grs. Interrested in all, but prefer lighter bullets for longer shooting.

My mistake the 160grain.

Any one tried these new soft tipped bullets in their Winchester Lever actions yet? Looking for a starting loading to reload, so I can gives these bullets a try.

Because they help me relax. After a stressful week there is nothing like going out to the shooting range and shooting a couple of round of trap, skeet,doubles or sporting clays to help relieve that stress. Or getting the rifles out and testing the reloads I have made. Plus you will have a hard...

Have several Winchester rifled slug guns. Shooting lead buck shot out of a rifled barrel isn't a big deal. Just remember you are going to get a lot of lead build up in the rifling. Makes extra work when cleaning. And your pattern may be larger than you want without there being a choke. If you...

240 grain bullet Something you need to know is if your state has a regulation on ft/lbs of energy at the muzzle. The state I live in does. That's why I use 240 bullets. Much easier to make the required amount of energy with a heavier bullet. If your state doesn't then go with the lighter weight...

240 gr. Bullets Either Federal Hydra-Shock or Hornady HP-XTP factory loads. Have used both and they kill deer past 150yds with proper bullet placement. (IF ITS RUNNING LET IT STOP) Using a Ruger Super Blackhawk 10-1/2. Hornady is what I use now because I can get the bullets to make reloads...

Only ever had two problems with my P89. Once put the guide rod spring in wrong. Yes there is a right and wrong way if you look at them ends closely. Cause the gun to not cycle correct. Fixed it my self right away just by turning the spring around. The second was the factory grips get real...

Been working on reloads for this gun for a friend. From the information I have been getting on this site. There aren't a lot of people who shoot this caliber. And yes, the ammo is a bit hard to come by. So unless you reload you may want to go with the .454 casull.

Picked up a Blackhawk and never looked back. If you don't like the feel of the grip get something different. I have both Pachmayer Presentation grips and Hogue Fingers groove grip on my hand guns. Finger grooves work and feel better for me. Thou. If you like the guns, but not the trigger get...

stoutly loaded LSWC Why would you need this for deer at around 30 yards? I zero my handguns in for deer at 100 yards and still don't use anything that is stoutly loaded in my .357's or .44's. I use factory Hornady 158gr Hp-XTP loads in the .357. And Hornady .240 gr HP-XTP loads in the .44's. I...