Recent content by D Rock

This link should get you to the powder baffles that Blue68f100 mentioned. https://www.shootersforum.com/attachments/powder_baffle_instructions_and_templates-pdf.10528/ Dave

Thanks. I sent them an email, just out of curiosity, but what you say makes sense. Dave

I could be missing something here, but I just went to In Line's web site and it looks like they only list ejector kits for single stage presses. They still list the ejector fingers for the Lee Classic but not the ejector kit itself. https://inlinefabrication.com/collections/case-ejector-system...

I don't own one so about all I can mention is that you'll have to reverse your dies since your turret will be moving in the opposite direction. What else are you having problems with? Dave

I'm a fan of the Lee Safety Prime. Started with the round primer reservoir model and have had all the generations up to the current one, which Lee modified to work better with the Auto Breach Lock Pro. They just work for me and that's all I can ask. CQB45ACP, there are enough talented people on...

That's what I use. I had a hole in the bench to mount my pattern maker's vice. It worked out perfectly. Dave

I use 1/4 teaspoon of Lemi Shine and 2 to 3 drops of Dawn in a full sized Frankford Arsenal tumbler with no tarnish. I live in a pretty dry environment, so that may help, but I've got an ammo box full of cases that I cleaned in 2018 that have no tarnish on them. Dave

Thanks, Project355, good information. Appreciate your work, Dave

Here's a link that to a product that Horskinator mentioned in the thread lasr month. https://www.fastenal.com/product;jsessionid=0K2rP42wGb6KleJ6rk2g-MaF.b9408a77-0eb9-3dd2-aa63-3c743b855037?query=7041958&fsi=1 The thread is here, post #36...

Sorry to resurrect this thread from Sunday but I had to clear the snow away from my reloading shed and while I was up there I took some pics to clarify what I was talking about in post #3. If you aren't getting free travel of your Auto Drum as shown in the pictures, the Clamp Knob on your Drum...

Or a bored computer tech messin' with us! Dave

Out of stock. Boy, that was quick! Dave

You may have the drum tightened down too much. Take the powder hopper off and look down the Auto Drum from the top as you are activating it with a case. Loosen the screw that holds the drum in, then gradually tighten it. You want the cavity in the drum to go all the way out if sight so powder...

I would go along with the alignment of the case that Lee suggests. I had the issue with .380 Auto on my Lee Classic Turret. The first thing I did was to get a better shell holder (Redding) but with your Pro 1000 I don't know that that will help you. That solved 99% of my issues but I found the...