Recent content by madscientist69

Found this http://www.tiropratico.com/pdf/passi_canne.pdfhttp://www.tiropratico.com/pdf/passi_canne.pdf ruger does 1-10 in 308 remington does 1-12 in 308 guess that explains why 180s were the limit i could stabalize in my remy. That is a nice Ruger video by the way.

you better check the twist on that ruger barrel or you gonna get a baffle strike at subsonic velocity.

Same mags as the ar15. Not much higher to shoot and build versus a regular Ar15 if you do it yourself, in my experience. All parts are the same except the barrel. If you plan on going quiet make sure that the gas port is in the pistol position. I would go with palladin machining if I did...

Try this site hours of fun reading http://www.quarterbore.net/forums/forumdisplay.php?f=27 I have a 16 in carbine in 300 whisper. Love it. The stamp will be here this month hopefully;) If you go sbr get a pistol position gas port and all will be well. Best tip I can give for this caliber is...

new forester is .185 with the allen head set screw

Just picked up a lb of unique so 10gr over the 125gr pill and lets see what we get:) Thanks,

any filler? Yes I know to watch for double charges etc. regular primers correct?

I have a marlin model 36 in 35rem. 230gr. round noses shoot great in it w/4198. I have some 125 gr. sierra hp 357 bullets. Any load suggestions to start? I want to stay away from lead in the microgroove barrel. These are just good solid plinking loads maybe 1600 fps? Should I go to...

try bill springfield at over at ar15.com

look at the 1-3 weaver, caa makes a $50 mount. cheaper than the millet but no lit recticle. true 1x lets you keep both eyes open. mine shots great but the range is generally under 25 yrds even though the 3x lets me go to 100 yrds. with solid hits.

lower velocity allows more time in the barrel when it exits from a slower load the angle is higher due to recoil thus slower loadings grouping higher? This is of course for the same zero and distance comparing two loadings,yes I know the overall trajectory should be different. Is reasonable or...

I use some scratch out car polish that I found in the closet. Works pretty good so far.