Recent content by Wildkow

Ask them for samples they sent me 20 but I haven't had time to load them. Besides I don't think my 16" 1/7 DDM4 will like them I only get about 2 MOA from their 55's w/cannelure now. No cannelure on this bullet FYI. I'm waiting for their 69 grain I think they will release it soon? Are you...

Thanks for the explanation, but do you have a picture or can you tell by looking at this picture if I have it installed correctly?

I've called Dillon but they don't or have given me conflicting answers. So I'm turning to the gun community at large. Can someone please supply me with a picture of a properly mounted cutting blade on the Dillon Rapid Trim 1200B? Words or explanations just don't do it as there are so many...

Vinegar does remove bluing! :banghead: :cuss:

While shipping is good and Ned seems to be a nice guy willing to work with customers until they are satisfied here is my experience. 3+ weeks ago I ordered a Nightforce 3.5-15X50 scope from MSP through Amazon.com Good price and prompt shipping. When it came to the door I opened the package...

Won't tossing heavy dies into the tumbler beat the hell out of the bowl?

Happy to hear you're out from behind enemy lines. The temp is down quite a bit from it's high this last Wednesday of 111F, :fire: today it was barely in the 80's and is now mid-70's. I'm lousy at searching but I'm on the hunt for those threads you mentioned. Haven't shot it much but I think...

This forum is just awesome! Today you all have finally driven something into this thick skull, i.e. I learnt something! :D I used the barrel chamber as a guide before I had my Wilson Headspace Gauge and it seemed to gauge correctly that's why I went ahead and fired those out-of-spec reloaded...

Info always helps and sorry I didn't back sooner on this thread. Ok so it seems that the 357 SIG headspaces off the shoulder or the shoulder and the case mouth. Seems shoulder and case mouth would be best as reloaderfred points out you have two datum points, more is better right? So if'n you...

This . . . http://21stcenturyshooting.com/Priming_Tool.php Use your exsiting LEE Priming Trays (Large and Small). Adjustable primer depth sensivity. Built in safety device that will only allow one primer to be seated at a time. Uses LEE priming tool shell holders or 21st Century Shooting Inc...

I'm an idiot when it gets to priming . . . Can't get my Dillon XL650 to prime .223 consistently. Can't get my Lee Handprimer to prime .223 at all. I'm screwed. . . :banghead::fire::cuss: But I can successfully resurrect or help resurrect 7 year old threads! :D

Grrrr. . . can someone please, please settle this once and for all! Headspacing the 357 SIG is controlled at the . . . 1) Case mouth 2) Shoulder 3) Extractor as below at 30:00 http://proarmspodcast.com/2010/07/11/055-were-getting-the-band-back-together-to-discuss-the-357sig-cartridge/...

I've heard Kahr PM9's take 200+ rounds per the factory to break in and feed properly. They sell for $600-$700 I don't think anyone here would consider any gun ready for CCW unless several hundred rounds have been through it? Am I wrong?

Hi Points are Ugly/Fugly HA! if it saved your life or a loved ones life it would be the most beautiful gun in the world! :p

In my limited experience, little over a year of shooting USPSA, it would have to be the Glock the "AK47 of pistols" because I have seen almost every other type of pistol jam, 1911's STI's H&K, Sig's etc. etc. I shoot in production and had one round jam in my G19 due to my reloading error, slap...