Recent content by Wolfen

Can anyone possibly give me a value of my S&L Rifle? It is stamped SYSTEM SCHULTZ & LARSEN MD.38 but I can't find any reference to MD 38 in 22LR. All MD 38's I have found ore in Centerfire calibers and the Actions are different. ACTION - The Action is 5.430" long, 1.340" in diameter with...

230RN & rbernie Thanks to each of you for your interest and comments. I started using the cut 3 land/grove barrels back in the late 70's when I started building Unlimited Silhouette pistols and Rifles. I purchased the "Blanks" from the GREEK in Tulsa. I found them to be the best for me...

Is 12 inch twist, three land too slow for 110gr - 120gr in the 6.8mm Rem? What is best?

Gordon - Take a look here to see a 5 Screw J Frame. Until I started to look for an answer to what I had, I didn't know they Smith made a 5 screw J either. Thanks for the reply. http://www.auctionarms.com/search/displayitem.cfm?itemnum=7797495&aa=%20Smith%20&%20Wesson%20%20Chief Old...

NateCowlishaw - Sorry my camera is Out to lunch, or I'd post pictures of my new "Fun Shooter" - Stainless New Ruger Vaquero in 45 Colt.. What a bute, both to look at and to shoot. If you're not into reloading, you still have Six factory rounds at your disposal - 38 Spec & .357 Mag in one...

I have an early Chief’s Special round-butt model with 2" barrel, flat latch and diamond grips - S/N is 65XXX. OK, I've seen them before but mine has 4 screws securing the side plate and no others. I've seen / owned Traditional 3 screw and five screw revolvers but, beside this one, I have not...

Outlaw - "Hey Jim, that picture seems odd to me. I have a NewVaquero (though its in Stainless) and my "warning" is not on the side of the barrel, but under it near the ejector. You can't even see it in the picture, but there is a few tips of the letters visable if you zoom in close. Its...

paddling_man Welcome aboard. I recently had your dilemma except I was pondering a Stainless Ruger New Vaquero in 45LC and a Stainless Ruger Super Blackhawk in 44MAG - both with 4-5/8" barrels. The trigger and complete action on the Vaquero was outstanding. I swear its factory...

lee n. field Please update on your statement - "I discard anything that's been run through a Glock". My son has a 23 and I carry a 21. I never use lead bullets in either as the Glock's rifling just doesn't like it. This I know but I haven't heard / read anything, until now, about not...

The Ruger Stainless New Vaquero 45/8" in 45 LC and Stainless Ruger Super Blackhawk 45/8" barrel in 44 Mag

Hard Decision treezorz Wait a minute. What about the twist? If you go with a 14" twist, you are going to have to stay with lighter bullets an therefore, limit your range even more. My 22-250 has a 14" twist. Lighter bullets is OK for it andthat's why I'm building the 260 AI. It will...

Hard Decision treezorz - You may want to consider something in 260 Remington. The 6.5mm is one very versatile and accurate bullet. I'm building up a #1 Ruger with either a Douglas XX Air gage or Krieger Barrel in 260 Ackley Improved (AI) on a Wenig Laminated stock toped off with a...

jaztym - Got em. Unfortunately , I need'em. They go with my set of B,D,E,F,H,K,L,MN & N. Also have both Large and Small primer rods w/springs. I too have had an used them for may , many years. Never let me down. I have them, along with my 16 LEE Case Trimmers, 2 Primer Pocket cleaners...