Pay it Forward in Reloading

Free Shotgun Stock Set
View attachment 844340

This "like new" Winchester 1200 Pump buttstock and forend were recently given to me and I have no use for them, so I'm offering them free.

I'll even ship them free to someone who has a 1200 that could use a new stock, or one to replace a buttstock that's been cut down for a kid.

John Picher
Long gone!
 
Free Shotgun Stock Set
View attachment 844340

This "like new" Winchester 1200 Pump buttstock and forend were recently given to me and I have no use for them, so I'm offering them free.

I'll even ship them free to someone who has a 1200 that could use a new stock, or one to replace a buttstock that's been cut down for a kid.

John Picher
Long gone! J.P.
 
I really appreciate all the help and advice I've received since joining here about a year and a half ago.
I've a bunch of .40 S&W Brass I picked up at my local range. I'm really not sure if this is even a worthwhile PIF, but if anyone wants some of this brass, I'll fill up small priority boxes until it's gone. I'd guess about 5 boxes.
I did notice there's a lot of nickel brass in the bunch.
Also please note that I sorted all this brass by hand and I'm sure there will be some 9's and 45's in the mix.

I could use one box only of the .40 S&W brass. That should last me quite awhile since I don't shoot it all the time.

I'm glad you have good thoughts about THR, it's a classy bunch of helpful people.
 
I could use a box since my old range closed and the new one I go to doesn't allow picking up brass.
 
I have 34 pieces of mixed brass in 22-250 available: mostly Norma, with a few Federal (FC) and Frontier. It's what's left of a much larger batch of once-fired brass I purchased. Deprimed, polished, FL sized, chamfered ... ready to load. Post here and PM your address if you can use them.
 
Last edited:
New here at THR. Have already gained a wealth of knowledge. I have recently started reloading several handgun calibers. I accidentally purchased a 1000 winchester small rifle primers (they were in the wrong stack).

So I'd like to offer a SoCal loader a free 1000 round box of primers. Guess I'm not supposed to ship them. I live in the IE and would gladly do a local meetup.
 
Primer going out to SlowFuse.

Anyone need a Lee Auto Prime XR hand primer set? It is used, and has a couple of flaws, but appears to be functional; I haven't tried priming cases with it. The flaws are cracks in the corner clips of the two primer tray covers. See photos. These should function with care not to further damage the clips, or you can upgrade to the new Lee folding primer tray.(https://www.amazon.com/LEE-PRECISION-90794-Folding-Primer/dp/B01GHU6BWM) Got this in a box of reloading equipment at an estate auction recently, and I don't need it.

 
Last edited:
Back
Top