interarms modle pph

Status
Not open for further replies.
S

SQUIREL444

Member
Joined
Sep 24, 2010
Messages
4
Location
dover delaware
can some one help me,,,i just got a bag of hand gun parts,and haveing troble disamblem the slider interinals,i cant find any specifications on it,the closest i found was a digram from numrich all the parts are here,,any input will be greatful ,walter p-series is close,,,thanks
 
Assuming you have a PPK slide:

To disassemble the PPK slide:

Put the safety half way between safe and fire.

Use a punch to push the firing pin in as you wiggle and pull the safety outward.

Once the safety starts to move outward, remove the punch and put your hand over the rear to catch the firing pin as you pull the safety all the way out.

Remove the firing pin and spring.

Remove the indicator pin and spring by pulling th e indicator pin forward until the rear can be lifted up and out. (Note how the indicator spring fits before removing the assembly).

Use a small screwdriver to push the extractor plunger to the rear.

Lift the extractor up and out of the slide.

Remove the extractor plunger, plunger spring, and safety detent plunger from the tunnel in the slide.
 
Status
Not open for further replies.
Back
Top