Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
mine is a Stevens 200(its made by savage) cost me $400, then another $120 for a Redfield revenge 2-7x32, I love it, simple it works, basically a model 10 without the accutriger. um not really a fan of the axis myself, shot one in 30-06. and I got a special dislike for Remington. around hear you...
I was able to test fire it, I have some feed issues, hopefully a Lil polish will fix. I only got one round shot. but when I inspected my brass the case mouth got shaved down to a sharp taper, any ideas on what happened? I kinda think that because it didn't fully cycle the case got slammed back...
it is a striker fired system now, and in the event that the sear fails the striker "should" ride with the bolt and prevent slam fire, the firing pin does not protrude from the bolt with the strike fully seated seated on the bolt
it is not the sear itself, it is called a sear lever/trip leaver and it works like a disconnect, but when I charge it it holdsthe striker, but the trip lever doesn't disconnect, but the sear does release if I let off the trigger. m fcg is 100% original
you can also through that stock in a black trash bag and let it sweatout the cosmoline. I had a similar problem with the stock on a nagant. I ended up refinishing it with a really dark stain
indeed I do know a couple guys who have a lathe, and they are willing toto help me with the bolt and barrel. is im planning on making my bolt face.002-.003 larger then the diameter of the357sig base to start off with then making slow adjustments as needed. anyone know what to do as far as coming...
okay, my new bolt has a recessed bolt face, and I'll need to open it up a few thousandth to allow the 40casing to fit, is there a tool made specifically for opening up the face?
I have heard of 40s and 10mm stems. but I've not actually seen one. the bolt itself, with my conversion is also made to run the 7.62x25 and the 9mm. I checked a 40case to my bolt face. and it fits. my trunions will be riveted, and the mags will stack the 40. so I guess now its a matter of can I...
alright then. I'll stick with the 9mm. another question is if it would be safe to solder the trigger housing to the tube vs welding. based on my understanding the housing doesn't take a lot of pressure?
So I finally started buying my parts to build a stengun. im using a mark 3 parts Kit, and a Indianapolis ordinance semi auto conversion. I was wondering if anyone has information on calibers, specifically the 357 sig and weather or not it could safely work in a build like this. I see that the...
the way I see it, the m16, M&A, and ar platforms wouldn't have ever gotten the forward assist if there wasn't a real problem present, you may never actually need it, but your gonna hate not having it if youever do, its not like you can slap your charging handle to help the bolt seat properly
read the IN hunting regulations first, if your looking for a deer hunting rifle in this state it wouldn't hurt to call DNR and ask them about a specific setup. if I wanted to go huntin for deer id look at a 20ga so I could use it for squirrel and rabbit also. by the way, its not illegal to use a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.