I read a Buffalo survivor account. The survivor was standing next to the security guard when the shooting started. The survivor heard the first...
Yes, you can. The 5.56 uses more powder at max load because it has a higher pressure limit than 223, all else being equal.
I’m on the front just about every day for work and I’ve never had to de-escalate. What am I doing wrong?
Agree. NRA is dead and has been for years. Sorry to all the lifetime members. But let it go.
Lyman or rockchucker? So we answered, mostly rockchucker. Ok, so you went with a Lee. Why, exactly, do we take time to answer this?
I went with a rockchucker about 30 years ago. My Dad went with Lyman about 50 years ago. Both presses are running strong today with thousands of...
Good info, thank you. Very interesting and helpful information in your posts. If I can hit a silhouette at 400, I will consider it success!
A scoped 45 Colt pistol and a 223 AR pistol with a 4 MOA red dot, for me. For others, sky is the limit, I just want to learn what others are...
Me too pretty much. Although I carry my Mountain Gun with 255 grain at 900 fps using HS-6 when I’m bow hunting. In the last three years bow...
Capable of both. This 25 Classic was new in 2017. I shoot everything from 185 RNFP cast, 300 grain jacketed to 335 grain cast. However, there...
I’d like to ring steel at 400 yards with both pistols shown in 2nd post. What are reasonable expectations or steel sizes I should consider? So...
In the photo is a 5.2 pound AR 5.56 pistol with a dot, 7.5 inch barrel shooting 55 grain factory IMI 855 ammo. Also a 4.2 pound scoped, 7.5 inch...
My old favorite was / is 45 Colt. I was going to go 460 S&W but instead went a different way. More to follow. What is your preferred caliber at...
Suppose a double charge scenario. When the cylinder unzips or comes apart, in either the 6 shot or 7 shot revolver, the failure doesn’t start at...
I shoot hot 38’s. Out of 357’s mostly. The hottest ones OAL = 357 Mag so (1) they will not chamber in my S&W Model 37 and (2) pressures are...
Probably not. Make a measurement as to how far the firing pin protrudes past the bolt face. I have a Savage that I need to change from 0.025”...
My first rifle when I was 7. Dad cut the stock off 2” and glued on a leather butt plate to fit me. When I turned 14, I cut the leather butt...
No, OAL likely wasn’t the cause. Rimmed cartridges, like 38 and 357, headspace on the rim. The rim also sets the proper relationship to the...
Agree 100%. That is one fine looking rig. Until I built mine, I didn’t fully appreciate the expense and fuss. But I gotta say, a well...
I grew up using Universal in 45 ACP. And Tightgroup is great also, very close to Universal. And neither one has issues with Hi-Tek coatings in...
Separate names with a comma.
