147 grain SNS Casting flat nose over 4.3 grains of Power Pistol, 1.1 OAL. You can thank me later.
I can second the fact that they are hard on optics. It broke my Vortex Viper windage adjustment and the ACOG you see here. The ACOG had some kind...
I am using a TA33 and like it. All my shooting is done offhand so weight was the primary consideration. The furthest I have to shoot in my area is...
25 yards is not too difficult as long as you discipline yourself and practice regularly. I made a point of practicing 3 times a week bringing...
I wouldn't bump the old one so I thought it would be OK to start another. Time to bump this back up. All these targets were shot offhand...
Lifesizepotato, you have just about all my must have pistols in your collection. Incredible photography to boot. This is my favorite pistol....
Consistency period. Same as drag racing.
With standard ball ammo I agree. For us hand loaders getting MOA groups with the SCAR 17 is not that difficult. If you are interested in some...
It is recommended to shoot 500 or so 230fmj first. The American Eagle is fairly warm and should cycle the pistol well. My TRS has 40,000 plus...
The Springfield Professional is one of my favorite pistols. It shoots amazingly well with the 200g. #68 H&G. This was shot off hand at 15 yards on...
The slide and frame slide easily with no spring. I don't think limp wirsting is possible with this gun. I have a kung-fu grip and have trouble...
UPDATE!!!! The recoil spring was replaced with a factory 18 lbs spring. It was actually shorter than what was in there but it is a bit...
Why would the recoil spring cause a failure to eject? As long as the slide comes back smartly it is up to the extractor and ejector to get rid of...
Thanks for the suggestions everyone. I have a recoil spring on the way. I will report back.
[B] I have a Smith & Wesson 1006 that has about 600 rounds through it. After running 500 trouble free rounds through it I am getting failure to...
A buddy of mine has one that shoots moa all day long using 175 SMK hand loads. No way I would have believed it if I had noto seen it myself.
Wow, thanks for the great ideas guys. I will get back to you all when I have something to report. Sammy
This die does not have the expander ball type like most die sets. The brass is Lake City in excellent condition. They are almost perfectly...
I am setting up a brand new RCBS Summit press with Redding competition dies for 308 using a .336 bushing. After getting the neck sizer setup I...
Sorry, the previous post's link didn't work. This is shot offhand at 15 yards, The middle and bottom targets are the VP9. This little pistol...
Separate names with a comma.
