Definitely factory ammo, but if you said, I missed it; what are you planning to shoot this ammo in? Might encounter some problems, especially if...
Hard to believe that I've been hunting (deer to exotics) for 70 years, so have quite a list of favorites. Shot my first buck with a model 92 in...
I don't believe you can get a strong enough purchase via the cover release indent to force the bolt shut on anything more than failure of the...
Most, if not all, will agree that extracting a round that failed to chamber is preferable to forcing it, in all but life threatening situations....
This^^^ If you ever want to ease the bolt down & load the rifle quietly, the FA is necessary to be sure you are in battery. Regards, hps
Cheapest way out would be to mount an "aiming target" 6-8" above a "scoring target" and have at it since these are only practice loads anyway. Or...
For all you M1 aficionados, here's a new use for your pet rifle, and if you like M1/M1A's, they trip even lighter. ;) [ATTACH] Regards, hps
Back in 2012, I picked up a case of loose rounds of "American Eagle XM193BL newly manufactured" ammo from one of the premier US distributors at a...
I never was attracted to the "Scout" scopes for the following reasons. But that's just me, have to admit, I've never shot one. 1)As stated above,...
Correct. Grinding off the stop allows you to remove one aperture and replace with another w/o disassembling your sight. Fine tuning zero from...
Have been shooting Garands since issued my first in early 1950's; one of my favorite rifles. Shot competition in the service and as a civilian...
Yes, I referred to 200 gr. NBT earlier, but last time I ordered from the Pro Shop they were out of the BT and I ended up w/the ST, but without the...
Looks like no 338 WM ammo available @ either Midway or NatchesSS (apparently everywhere else...https://ammoseek.com/ammo/338-winchester-magnum)...
Those short pistol cartridges make for an amazing cyclic rate of fire, don't they? :rofl: Had similar experience with a new to me Luger once....
You can make them dual purpose by cutting string trimmer line a few inches longer than your barrel, holding a hot soldering iron on one end in...
Yep, ya can't have too many tools @ the range. When I was running our club's HP rifle matches 2x/mo, (one NRA XTC match and one F class/mo) my...
Well then, you either have way too many guns or you just need to shoot more. ;):rofl: Regards, hps
Great way to start out, congratulations to you both:thumbup:. It's been over 50 years since my son shot his first buck and we've shared almost a...
I was on a 5000+ acre lease (thick S. Tx brush country) where the landowner took management seriously. Did a helicopter survey every year and...
Funny how hard it is to outlive those embarrassing moments. :rofl: In preparation for a batallion stationary mounted M1919 MG qualification...
Separate names with a comma.
