I put a 21 lb. wolff recoil spring in it before I started the test. after the test I installed an alpha wolf barrel (fully supported chamber)....
good to hear. those starline 45 super cases are tough as all getout. I used them in my 45 super tests, in my g30, using a stock glock barrel....
any case head swelling with the 45 super load? glad your stock 1911 survived the 45 super load.
file down the sprue on the extractor. the one on my extractor was preventing the top round in the mag from rising up out of the mag into battery...
ever replace the recoil spring in that gun?
only for the bad guy.
get a harris bipod while you are waiting. might help on the coyotes, too.
let us know how they run in your rh. although I probably will never get another chance to go elk hunting down here, or up there, I always carry a...
icebear, welcome to the forum.
a belt mountain base pin is not a solution to your problem, but I would install one anyway.
I believe he is a moderator here at thr.
I enjoy his contributions to the "tales of the gun" series as well as his articles in g&a.
and the old levergun load pressures were so low that some of the cases did not stretch and, therefore, could not reseat the primer (a sure sign of...
did you mean 1.245"? my ball reloads are @ 1.240" col.
why don't you just convert your g21sf? [MEDIA]
let us know.
I also have extra strength base pin latch springs in my super Blackhawk and the above new model Blackhawk in 357 magnum. the belt mountain base...
look for burrs around the frame cutout holes for the base pin and the base pin latch. I have a new model Blackhawk that had burrs on the latch...
welcome to ruger customer service. glad your gun is running well.
just found an article by someone we all know: https://gundigest.com/handguns/hunting-handguns/hot-rodding-45-colt
thought that might help you...
that is patently false. the 45 colt case design and material are both the same as the 44 magnum case.
the 5-shot custom single action revolvers...
Separate names with a comma.