Interarms Mark X 300 Win mag I purchased in 1971!:)
My benchtop is 2 pieces of 3/4 MDF. I used Minwax high build polyurethane as a finish.
Welcome to THR!
First once fired I ever bought was from this place.
I'm also on a well with a septic tank. Our water is pretty darn good. I get it checked every year. I switched from a dry media vibrator to wet...
As for the Lee bench primer, I fitted it with the RCBS universal tray. Works much better than the tray that comes with the primer. My opinion.
There's the handloadersbench.com.
..... and another Pennsylvanian
Welcome to THR:)
…. or if maybe you just enjoy reloading!:)
I have a room in the basement dedicated to reloading!:)
I started out doing priming on my 550B. It was pistol only though. When I built my 5.56 AR, I hand primed. Then I thought about how fast I pumped...
As Bat posted, Glocks aren't picky. I've yet to try any BE-86, as I have a boatload of Win231/HP38. As for primers, I just use CCI 500 SPP and...
My Gen4 G23 that I bought in March of '13! Why. Because it was my first pistol and right now, it's what I shoot best!:)
A dehydrator works really well! You will have dry brass inside and out for sure!:)
I feel the primer track bearing makes a huge difference too! As for the primer tube deal. I also forgot to change the tube from large to small...
IMO, perps don't have a minimum acceptable level. They will take whatever they can get!
When I was 15 one of my uncle's gave me his 22 rifle. A Mossberg 42 M (C)! It's still an awesome firearm! I restored it two years ago!:thumbup:
Wilson Combat has Beretta mags in stock.
I don't know. I've always bought plated bullets! :)
Separate names with a comma.