Quantcast

Search Results

Search Again
Page 1 of 2
  1. gwb4964
    Post

    Dillon 750

    The cut off switch for primer advance you just lift the head part way and disengage the rod just like on the 550 works great and takes a second....
    Post by: gwb4964, Nov 9, 2019 in forum: Handloading and Reloading
  2. gwb4964
    Post

    Dillon 750

    I have the roller bearing system on mine but still have the primer problem and it only partially helps with the powder spillage. thanks, Gary
    Post by: gwb4964, Nov 9, 2019 in forum: Handloading and Reloading
  3. gwb4964
    Post

    Dillon 750

    I have one on my 650 you need it with as many foulups as I've had on mine. thanks for the reply, Gary
    Post by: gwb4964, Nov 9, 2019 in forum: Handloading and Reloading
  4. gwb4964
    Post

    Dillon 750

    Sounds like you've had the same issues I've had I have had my 650 for 2 years and It's been a pain in the back side nothing but frustration and...
    Post by: gwb4964, Nov 9, 2019 in forum: Handloading and Reloading
  5. gwb4964
    Post

    Dillon 750

    I have the roller slide on my 550 and works perfectly. the 650 works well when it works but if it gets dirty in any way it malfunctions. I'm not...
    Post by: gwb4964, Nov 9, 2019 in forum: Handloading and Reloading
  6. gwb4964
    Thread

    Dillon 750

    Any one have a comment about the New Dillon 750 I'm thinking of selling my 650 and getting the 750. I've had a lot of problems with the primer...
    Thread by: gwb4964, Nov 8, 2019, 22 replies, in forum: Handloading and Reloading
  7. gwb4964
    Post

    Identity and Date of Manufacture of S&W Revolvers

    Ok thank you I do appreciate you. GW
    Post by: gwb4964, Mar 14, 2019 in forum: Handguns: Revolvers
  8. gwb4964
    Post

    Identity and Date of Manufacture of S&W Revolvers

    I gave you the wrong dash number it should have been Model 19-4 not 2 I have a Model 64-2 sorry about that. so its a -4
    Post by: gwb4964, Mar 14, 2019 in forum: Handguns: Revolvers
  9. gwb4964
    Post

    Identity and Date of Manufacture of S&W Revolvers

    Beautiful!
    Post by: gwb4964, Mar 11, 2019 in forum: Handguns: Revolvers
  10. gwb4964
    Post

    Identity and Date of Manufacture of S&W Revolvers

    I have a S&W model 19-2 looking for date of manufacture 357 mag 4" Square adjustable 69K2940 Pinned [ATTACH] [ATTACH]
    Post by: gwb4964, Mar 11, 2019 in forum: Handguns: Revolvers
  11. gwb4964
    Post

    Suppressor question

    Got another question for you. you seem to have a lot of knowledge on the subject of suppressors and I appreciate your feedback. Booster mounts vs...
    Post by: gwb4964, Mar 6, 2019 in forum: NFA Firearms and Accessories
  12. gwb4964
    Post

    Suppressor question

    I have another question: I'm new to all this so open to any and all advise. Booster mounts vs 3 lug mounts for a 45 acp is there an advantage one...
    Post by: gwb4964, Mar 6, 2019 in forum: NFA Firearms and Accessories
  13. gwb4964
    Post

    Suppressor question

    That is very good advice I'm a novas when it comes to cans and am trying to learn all I can about them before purchasing one. I had thought about...
    Post by: gwb4964, Mar 5, 2019 in forum: NFA Firearms and Accessories
  14. gwb4964
    Post

    Suppressor question

    I hear you I debated and may still wait a while. Have fun!
    Post by: gwb4964, Mar 5, 2019 in forum: NFA Firearms and Accessories
  15. gwb4964
    Post

    Suppressor question

    Thanks this was very helpful. I have not decided on a can yet I’m in the research stage yet and this type of information will help me make up my...
    Post by: gwb4964, Mar 4, 2019 in forum: NFA Firearms and Accessories
  16. gwb4964
    Thread

    Suppressor question

    I'm not sure if this is the right forum for this so I'll ask forgiveness in advance. I'm thinking of getting a suppressor and would like to know...
    Thread by: gwb4964, Mar 4, 2019, 19 replies, in forum: NFA Firearms and Accessories
  17. gwb4964
    Thread

    327 Federal mag

    I recently bought an SP101 in 327 federal mag and have 32 H&R mag dies I have been told they will work for the 327 fed. also is this correct?...
    Thread by: gwb4964, Jan 17, 2019, 17 replies, in forum: Handloading and Reloading
  18. gwb4964
    Post

    Identity and Date of Manufacture of S&W Revolvers

    I just emailed S&W and they got back with me in about 4 days with the date on mine. GW
    Post by: gwb4964, Jan 17, 2019 in forum: Handguns: Revolvers
  19. gwb4964
    Post

    Identity and Date of Manufacture of S&W Revolvers

    i've been looking at that on Amazon I think I'll pick up the 4th addition. Thanks, GW
    Post by: gwb4964, Jan 12, 2019 in forum: Handguns: Revolvers
  20. gwb4964
    Post

    Identity and Date of Manufacture of S&W Revolvers

    Wow that is great to know everyone else said it was late 80s so they made it with a threaded barrel in 1977? everyone says they were pinned up to...
    Post by: gwb4964, Jan 12, 2019 in forum: Handguns: Revolvers
Showing results 1 to 20 of 35 Next >
Search Again
Page 1 of 2
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice