I can't find a 400gr Lehigh bullet in .500".
I found a 420gr. Is that the bullet you are loading?
If so, there is plenty of load data on...
BE-86 is all I use anymore in 9x19.
Rubbing compounds contain abrasives.
The 45 works great in mine.
The powder that produces the most velocity in a long barrel will generate the most velocity in a short barrel.
Accuracy should be priority number...
They say Unique is very spikey. Meaning once it reaches a certain pressure, small increases in charge weight can equal huge increases in pressure.
I load all my 147's with BE-86. My practice rounds and SD rounds mimic each other, other than bullet used, and are in the +p area.
Ramshot True Blue when I was using 124s.
Went to 147gr. Less recoil and better penetration. BE-86 won out in accuracy for the 147s.
AA#9 has a very similar burn rate to 2400.
I have made some very accurate and powerful rounds with it in 44RemMag and 45Colt Ruger only.
Maybe they are going to discontinue it.
Did IMR Unequal ever even hit the shelves before it was scrapped?
Cheap moulds ain't good and good moulds ain't cheap.
There will be instructions in the die box.
Ran lots of H110 through my CM Lite. Never had any leaks. Sounds like a defective unit.
If you are trying to mimic self defense factory loads, I'd get some BE-86 powder.
Many factory SD loads use this powder and it became available...
I gave up on Quickload for straight wall cartridges.
I remember I put in some 45colt Ruger only data once, that John Linebaugh had tested at a...
Cheap, inconsistent digital calipers?
Hornady 10th lists an OAL of 1.060" for the 124gr XTP for 9x19.
380Auto a.k.a 9mm Kurz a.k.a 9mm Browning Short a.k.a. 9x17mm.
Yes it is 9mm.
Edit: Kurz is German for short.
Don't shop at stores that treat law abiding citizens like blood thirsty criminals.
Separate names with a comma.