Just some pictures I downloaded from the Internet:
I always thought it was the S&W Combat Magnum Model 19 with the 2.5" or 3" barrel.
Friends Don't Let Friends Carry Mouse Guns
The cylinder is a lot longer than it needs to be.
How do you define "superior" ?
The OP asks for "the best expansion, and minimum of 12" penetration." In my opinion, the best way to find that...
He should be able to find a SAR B6C for around $215.00 to $230.00:
I only shoot 13 rounds through my R9, it is very snappy. Then I shoot a box or two through the RM380.
Review of the Alfa Proj 9231
Yay ! I love 9mm revolvers !
Shooting the Bull 410 did some great work, but you have to look at the results and disregard what he says. Its obvious that he fell in love with...
All of the micro-nines need frequent spring replacement because the slides have less mass and the recoil springs are worked hard compared to...
I bought a Kahr CM9 and I followed all the instructions that Jocko on KahrTalk recommended for "Proper Prep" of a new Kahr:...
Why wouldn't Precision One's loading of Hornady's XTP work well?
It also is a good case for why you wouldn't use FMJ.
I think if you start with 294 ft-lb of muzzle energy which is 380 Auto +P (for a 100gr bullet), there has to be a bullet profile between .354 and...
9mm Luger 35,000 psi (SAAMI spec.)
9mm Luger+P 38,500 psi (SAAMI spec.)
9mm Luger+P+ 42,000 psi (No standard - Suggested limit.)
There are many...
I did lose a magazine part when the base plate just slid off once... the locking plate went flying and I never found it :(
I did get Kahr to...
I wish I knew more about action and the Arsenal Stryk. I'm not sure what mitigates recoil - is it the forcing down of the block along the cam ?...
I think that's what happens when you make penetration a non-variable and don't put a cap on muzzle energy or felt recoil.
I think the 30 SC is...
I always wonder how they arrived at 0.313 " for the bullet diameter. I doubt computer modeling came up with that exact diameter for the best...
Separate names with a comma.