That's not excessive at all. Pulling the hammer all the way back, do you
have room to get a fine stone in there to simply smooth the pin...
Before you do anything else:
- How far does firing pin protrude from the breech face when trigger pulled/hammer down ?
Measure and let us...
If handloader -- 45-70
If commercial only -- 450M
You'd have to work pretty hard to defeat the designed hammer-down/locked-on-safety-pin set up.
Only a Democrat would demand greater Safe Space be...
And yet... and yet... an 1873 w/ a 20" barrel is a Short Rifle.:rofl:...
A 357 case is going to reduce the pressure relative to that 1/2cc (2.1gr) load of TrailBoss in a 38 case/158gr RN bullet..
Although normal math...
I was under the impression that model came in at 22"
and yes, I would consider it cut-down to 18" to make it a carbine....
They can "name" it anything they want.
A "Short Rifle" at 14-16" is still a carbine.
and a 20" barrel is still a short rifle.
A rose by any other...
Ruger's already selling their basic Ranch/bolt action in 350 Legend for ~$450
Put a dab on the first case and wipe it on/down the case w/ thumb forefinger
- Size case
Lube the 2nd case w/ residual lube on thumb forefinger...
Rifle: 24+ inch barrel
Short Rifle: ~20" barrel
Carbine: Anything [significantly] under 20"
... a public domain caveman...
Depression/Scratches - no problem
But that 1st case is the Grand Canyon :ninja:
Pull & toss....:(
Before conviction is different from after conviction.
(Although the court may have already issued a Red Flag prohibition even before that)...
Larger context: http://forums.thecmp.org/showthread.php?t=57336
Here are two:
very low pressure (680 bar) <...
Again . . . Read the District Attorney's initial determination HERE:...
Read the District Attorney's initial determination HERE:...
3.2 oz (water)* = 3.2 oz 28.35cc/oz = 90.72cc
Do the math knowing what you see below.
All credit to LEE and his powder Measure Kit...
Separate names with a comma.