For me It's kind of #2 but decap in my drill press using just the decapping pin and a washer to center the case, decap only and you feel the...
Just make a bushing/sleeve out of PVC pipe/other plastic tube or fittings, if it's slightly too big slit it and squeeze it a little,...
Pet Mountain has 5/16' and 3/8" will either of those work ?
I have found brass like that and...
I was timing a guy at a speed steel match that shot a 9 out of a 40.
The extractor will hold back the 9...
I found these 6x6 plates with a hole in each corner($4 each) at my local steel yard and mounted every press on one for a uniform mounting hole...
Sadly the list price is over $500, and I've only seen them for full price.
Hopefully the $ will come down in 6 months or so.
My needs are somewhat different in that I swap out different presses to the same spot on my bench so need a "universal" light.
She only knows because you told/showed her:eek:
Two rules to live by:
1.- Only take one gun out of the safe at a time.
If you need to take...
I have given up on the FA separator and now use a dollar store bucket with a paint strainer bag in it.
I set up a brass/pin separation line that...
Instead of a strainer/colander, I use another Dollar Store item... a wire waste basket, yes it costs $1.
never mind then
Get yourself a wellnut from the hardware store, it'll never loosen again:
OK, if you are talking about a visual que, I use the cocking notches for this when there's no flutes.
The lever arm is in the wrong slot of the disc under-side.
Turn the disc over and look at it, the correct slot will be obvious, line it...
um...no explanation needed:
Because CA has a patent on their extractor design.
So there's that,
There's a new design pocket swager for a single stage press on the market that has Belville spring washers in it so it's self...
Hid my own Easter Eggs this year :confused:
I only ever load 5 rounds into a cylinder...
Why? Because there's 5 rounds per row in my ammo boxes and I like things even.:uhoh:
That has burned...
The difference between 1.445'ish and 1.325 is suspiciously the same as the difference in case length between 38sp and 357.
Any chance you were...
Separate names with a comma.