How loud is the supersonic crack of the bullet?
About 130 db.
Are you sure the bolt handle wasn't pushed in while pulling the bolt to the rear ?
That is how they function, pull outward on the bolt handle.
Usually economical means poor performance.
Quality effective sound suppressors is going to be a bit expensive.
If you are only going to use it on...
The SiCo Omega 9 can not be taken apart for cleaning so don't run any lead handloads though it.
I have shot the omega in the past and wasn't...
The Rugged Obsidian .45 is more effective at sound suppression than the Sig SRD45.
The Obsidian is currently $654 from silencer shop and worth...
Rugged Obsidian can be dis-assembled for cleaning, Wolf-9SD can not.
The rugged is only rated fro .300 BLK sub-sonic, The Wolf is rated for .300...
+1 on the Rugged Obsidian.
+1 for the Rugged Obsidian.
It will handle .357 & .44 Mag. with barrel lengths 16" and longer.
I e-mailed about that question and a couple others,...
Yes, It was manufactured as a long gun and requires a tax stamp to shorten it.
This is a relatively new product but it works at removing carbon.
I was amazed at how quickly it removed the carbon from the face of the cylinder...
If he had removed the firing pin prior to chambering the device, the bolt cam pin may have slightly rotated as it would not have been...
A true Beretta 93R is a restricted nfa item. Only LE, Military or an NFA dealer can posses one as they were imported as a select fire pistol. I...
Marine-Tex, I use Johnsons paste wax for release agent. One can will last you a life time.
One coat of wax is enough for marine-tex, I have had to...
You may have to try a new barrel, but you should try a new bolt spring first.
I made one of those a long time ago.
Then made a full length guide rod just for yuks.
You won't screw up the barrels using bore brushes.
Get yourself a one piece Dewey coated cleaning rod, the appropriate jag & adapter for the...
Depends on the company.
Most plating companies charge a certain amount per bath regardless of the number of pieces.....as long as they all could...
On the rare occasion when a customer wanted his action glued in the stock, we used JB Weld.
Have you already drilled the stock so you can remove...
Separate names with a comma.