That was the pressure of his .38-44 handload and it's probably the most well known. It used 2400, not Dupont #80. Keith did not develop the...
TC is no more and S&W ain't gonna do anything for you to install an aftermarket barrel. You can polish the receiver or you can polish the barrel....
And most today would deem that imprudent. Nobody was shooting thousands of them either. There haven't been any factory loadings in several...
Unless my gunsmith could convince me that other than chamber depth the guns are the same, I'm going to opine that the Model 10 is not the place...
A .22Mag/20ga makes the most sense. It's not like you're going to be plinking hundreds of rounds in a sitting with it and the extra power/range of...
Almost forgot, my holster is a Desantis mini-scabbard.
It's a lot more effective than the .22LR, with a good bit more range. It's a field cartridge, not something most people are going to shoot a great...
I always got the impression that the DW .357's were very comparable to the other mid-frame .357's like the GP100 and L-frame.
The barrels are supposed to be tight and are intentionally made very slightly oversized, due to variations between receivers. I've built dozens of...
Polish the shank, standard operating procedure. Oil it and tap it on. Don't force it, you'll crack the receiver.
The lever won't close all the way, it no longer functions. Leverguns make great suppressor hosts, especially with that long barrel and a peep...
I did but the rifle it's attached to ain't worth a crap. [ATTACH]
Mine might have had wood grips when I weighed it. That may account for the difference. The factory walnut is a bit chunky. The extra cylinder is...
They're heavy! Here's what I have: Frame - 40oz 10" full lug barrel - 32oz 6" full lug barrel - 19oz 4" full lug barrel - 11oz 8" short lug barrel...
Horse hockey. It's mighty interesting that in the handgun world, an increase of 0.05" in diameter and 25% heavier bullets is considered to be...
No effect on zero that I can detect. [ATTACH]
.22 rat shot might have the range of a hoe out of a revolver but in a smoothbore "rifle" it's a different story. I've long wanted to try a garden...
Mid-length gas. Thanks! https://www.midwayusa.com/product/102178005
I built two 6.5 AR's. One an 18" with a Grendel Hunter upper. The other a 16" with a Faxon barrel. There's over a pound difference in weight. Some...
The Henry has the standard 1-20" pistol twist, so I would not expect the bore discrepancies you see with the usual slow twist (1-30" or 1-38") rifles.
Separate names with a comma.
