I find the ACP revolver with a 4” tapered barrel ideal for carrying. The large chambers and bore keep the weight down yet the cartridge is...
There are lots of choices! [ATTACH] Kevin
I have done a couple. Here is a S&W Model 28-2 that got a conversion to 45 ACP and became round butted at the same time. [ATTACH] Next is a S&W...
Looks good! Kevin
I want a bolt action that is scaled to the Carbine cartridge. No sense taking something designed around a Mauser cartridge, it would be overbuilt...
Bob, I don’t own an original but I have studied them. When the Texas Rangers moved of the ranges and i to the cities, it was made clear to the...
I build one back in the 70s with a round faced lock a little smaller than Bess (Davis?), a brass tulip barrel, a walnut stock stained nearly...
I used a 1/2 rod that was available to me from a neighbor who happened to be a machinist. He was able to drop it in a batch of stuff to be...
Still wanting you to tackle the Sunday holster as marketed by Brill. Kevin
Imaginary rifles? I want two. First is a Winchester 1892 chambered for the 45 ACP. Next is a small bolt action built for the 30 Carbine. Kevin
I have never experienced this. Does it happen? I have shot cartridges from the Civil War and many from the Spanish American War and WW I. All...
Here is my Model 25-5. [ATTACH] [ATTACH] I got it years ago to hunt Ohio whitetails. It worked better than the 44 Magnum I had been using. It...
Use some type of thread sealant or thread locker on the rod to prevent it from occurring again. Unscrew the rod, flush the threads (male and...
I carry a 45 ACP revolver, don’t really think about it very much. Kevin
For production 357 revolvers, Dan Wesson certain had the attention of the Silhouette shooters. Small targets far away were their specialty. I...
Until 1935, the Model 1847 was consider the top of the heap, as to power. In 1935, S&W introduced the 357 Magnum as a factory load. Prior to...
I stopped shooting competitively almost 30 years ago. I still shoot just not in competition. If I know I will be going to a range for paper...
Sounds like a good plan. Annealing the brass might help but you would need to anneal it down to the web so you could end up making it too soft. I...
Using a slightly larger and longer forcing cone. Another option for your cylinder is to take a 44 or 45 cylinder and make inserts to fit the...
Thank you! Kevin
Separate names with a comma.
