FFP Mil/Mil is a must. I highly recommend 1) 0.2mil wind marks & 2) Christmas tree reticle. 34mm tube which will come with ~30mil of internal,...
An inevitable PRS competition experience I’ll share which reared its ugly head on me this morning: That special feeling when you’re shooting well...
I have an RL16 load developed because I like to know I have a backup plan, but I exclusively shoot H4350 in 6 creed. I’m finding myself long...
Typically, using a 20moa rail will require a scope to have (roughly) 40moa of internal span. Which MOST do. As I described above - an optically...
For a very long time, no. I carried a 380acp LCP for the longest time. But the last two years, I have dedicated more interest and effort to...
These are my answers. Plus a skipod and the edgewood rear bag on occasion. More often than not, I shoot from bipod and soft rear bag, because...
Because the average American is interested in a simple, turn-key solution which is inexpensive and delivers what they need, blissfully well. So...
I’m a big fan of shooting 22LR at short range as a practice analogy for centerfires at long range. I regularly practice with a 22LR Savage Mark II...
Whether I buy new, used, or new blemished, almost all of my scopes quickly become blemished. I don’t sweat the small stuff, as long as the big...
That was the reference... there’s only ONE... the OP shouldn’t count on his one barrel being the ONE 204 Ruger barrel which makes it to 3500rnds...
... and buy an aftermarket Volquartzen or Kidd trigger for it...
How long will it take you to fire 2000-2500 rounds if you’re only chasing fox? That’s only about when you’ll see a change, not s limit. Consider...
$385-485 for Savage drop in barrels from Shilen, Criterion, or McGowan. Very affordable.
Most (if not all) of the GT shooters I know (a dozen and a half or so shooters) have all converted to blocked magazines. It SHOULD feed well...
I have two 6 Creeds and a Dasher for PRS use. I bought a barrel last year to ream for GT, but did not yet do so. I like having both so I can keep...
PVA claims blocked AICS mags should allow 2.53-2.55” COAL’s, give or take specific mags and specific blocks. MDT’s with their spacers are 2.52xx”...
@GoldieMI - this. Why isn’t the mag latching? Is it hitting the receiver before latching? In other words, not getting high enough to latch. It’s...
If you’re putting a -20 ring insert on top of a +20 rail, you’re netting 0 MOA, which removes the ability to utilize the maximum potential...
Compounded even more when comparing the extreme ends of the spectrum present in PRS competition - free recoil firing from a barricade to loaded...
AW mags do need a longer latch - but that helps them sit higher in the magwell. If yours isn’t latching, it seems it’s not able to be inserted far...
Separate names with a comma.
