The other day I shot some ladder loads with the Lee 105gr SWC out of my 92FS Centurion. I swear they were like shooting lazers... Sized to .356...
Just get the uniflow to QC conversion kit and be done with it... If that kit is no longer around, look for the drum and tubes then. Talk to RCBS,...
You might want to consider a grip n pull also. They are expensive ($40) but they do several calibers. http://grip-n-pull.com/
If the LCT you are using is the 4 hole Lee Classic Turret, then by all means you should use the priming system that comes with that turret. I did...
What you do not want is the stepped inner brass lining that goes up about half way. Ammoland and some other brand has made that I think, it is...
That is a good combo for sure. I prefer 200gr swc in my .45 with about 5-7gr of PP, but I had heard that there was another powder that was very...
Easy fix for the primer thingy, they make little blue pills for that kind of uhh, floppy problem...
I do not know your situation in KY but in CA that is pretty slim pickins. Most folks will have at LEAST 20 lbs of powder- pref. 40+ lbs and at...
There are two stages to casting. Ingotizing and boolit making. First you take your lead and melt it all down in a large pot or smelter (Satans...
Separate names with a comma.
