Does anyone have good loads for bullets heavier than 80 grains? Like 88-90 grainers with H4350 or smiliar powders? Only can find loads with magnum...
Simple to convert to Led your existing fixtures. Bypass ballast change lamps
I’m Master Electrician by trade but telling you it’s easy. Look on...
I found this on another forum
Second the Frankford Arsenal was using CH4D similar to RCBS. Like RCBS products and Dillon but Frankford lot easier and faster does better job
I have old model works great all you need to do a good job and a bottle of propane
I just bought 2lbs at powder valley to try out see if I like it myself. I know benchrest guys I shoot with like it. I hope it does well in 6 and...
Thanks so much appreciate it a lot
It does thanks lot appreciate that
Does anyone have good loads for Norma powder in 6mm and 6.5 Creedmoor? Using 105-108 gr bullets 6mm and 140-147 gr in 6.5.
Found some powder but...
Thought about that have lower spring weight already went to heavier one slow brass slinging down a bit
Thanks for help that’s bkind of information I thought was right but wanted some more insight
How many of you have loaded 40 caliber loads in 10mm brass? Any issues? I know you can do this just like loading 38 special loads in 357 cases but...
Good information I have a 1873 32-20 that belonged to my great grandfather. I’m 4th generation to have it. I wrote Winchester years ago still have...
I agree I put SAO trigger in mine helps with reset S2 doesn’t have firing pin block do no worries there. I only changed springs didn’t feel it...
They probably send you new one call them. Sounds like you need clean brass first dirty brass hard on dies and press.
I’m reloading 9mm for while now got components cheap but not cheap anymore. Impossible to find primers still have some but hope this lets up...
Thanks again I got 95% out need more vinegar didn’t have enough. It does work
The solution cleaned barrel 95% or better I’d say. It didn’t matter barrel wasn’t stainless I guess? I dried it and oiled it with a patch think...
Thanks for help. I can do that
Thanks I might try slugging barrel. What size balls do you need for slugging barrel?
Separate names with a comma.