Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
I like Berger bullets for 300 WM. The VLD's are very accurate for punching paper and we have had very good results on elk and Oryx as well. Depending on the rate of twist of your barrel you may be limited to certain weight bullets. Mine in a 1:12 twist which pretty much limits me to 185 gr...
I would recommend getting some tempilaq since it is difficult to judge by color change alone. I anneal with a Bench Source and set it up with Tempilaq with a sacrificial case. Different brands of brass will vary in color even when the same amount of heat and time is applied.
Glad to hear this bill was tabled but beware that comments afterward from the Representative who introduced this bill says he will try again. I wonder where in the world we find these liberal knuckleheads in this state and elect them to office. I emailed my representative on this bill and said...
Heliotaxi:
Good luck on the hunt. I live in southern NM and hunted countless times in the Florida's for quail and and other creatures. Haven't been over there in a couple of years since the quail populations have been so poor. Pretty rough country especially where the Ibex are most likely...
My 300 WM likes IMR 4350 with Berger 155gr. and 168gr. VLD's. Both have these have shot sub .5 MOA groups and have been very effective on both elk and Oryx. Tried R-22 and just wasn't getting the same accuracy but may be due to the lighter bullets. They are too short to get close to the lands...
Not a fan of Accu Trigger. My Model 12 came with one and started malfunctioning with less than a 100 rounds through it. Started locking up intermittently then wouldn't function at all. Tried everything and finally installed a Rifle Basix Sav-2 and deposited the Accu Trigger in the trash...
I tried reading the legislation this afternoon on-line and must say after the first read it is nearly non-comprehensible and will go back and read it a few more times. At first read, it looks like many popular rifles including the venerable 10-22 maybe illegal under the new law. I also had...
IMR 4350 is a good powder to start with for a 300 WM. I shoot both 155 and 168 Berger's in mine and they both perform well with IMR 4350. I would recommend that you get tools to measure headspace so you can properly set up your dies. You will want to adjust your dies so the case head spaces...
The Sinclair gauge does a good job when paired with a quality dial indicator. If you really want to step out there, get an Accuracy One concentricity gauge.
I purchased a 700 CDL SF in 300 WSM a couple of years ago and had similar issues. The rifle would just not group well despite trying several different powder combinations. Was ready to get rid of it it but decided to give it a another chance. Had Charlie Robertson at Score High pillar bed the...
I have been using a Kestrel 4000 unit for about ten years now for hunting, fishing and shooting. The ability to record and download data is very useful but the interface could use upgrading. It would be nice if it would interface with Apple products such as the iPad, iPhone or Macs. I use JBL...
I have two LR308 uppers with one being 16" and the other 20". Both barrels are free floated and shoot well. If you plan on shooting greater distances you will be better off with the longer barrel.
Steve4102:
Thanks and completely scrolled down in the QL caliber listings and found the 6.5 Creedmoor. Guess I should have looked more closely. The H2O capacity listed is different from my new cases (51.5 v. 53.5). Having a custom rifle built by Score High Gunsmiths and getting my reloading...
I have V 3.6 in Quickload and it does not list the 6.5. Has anyone manually created a cartridge file? I created one today and would just like to compare parameters. I checked against the Hornady manual and the fps are very close to the results calculated in Quickload. I measured the H2O...
A couple of years ago I purchased a CDL SF in 300 WSM. Out of the box it wouldn't group as well as I had hoped considering the cost. Was ready to unload it but decided to have a little work done it. Score High in ABQ floated and pillar bedded the action as well as crowning the muzzle. I also...
I have a DPMS Prairie Panther in .223 and two LR 308 uppers. Thousands of rounds through the 223 and hundreds through the 308's. Never had an issue and with either of them and accurate enough. I would recommend replacing the factory trigger with an aftermarket trigger such as the Geissele.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.