Hey Bannockburn-which pocket holster are you holding in your left hand in the last photo you posted?
I've been trying to find a suitable way to carry a new P365.
Handle it with discretion. Tough to do with a full size sidearm, but for the PM9 or PM40 that rides in the tank bag gets palmed and put into the cargo pocket of my riding pants when I get off of the bike. Situational awareness and shielding the transfer with your body or a gas pump-nobody sees...
http://www.cditorque.com/
CDI mfg all the way.
They make torque wrenches for SnapOn.
For 60 in/lbs one of their screw driver type products just might be the ticket.
Like Stu1ritter says, they don't work on the extreme upper and lower end of the ratings of the wrench.
White Oak Armament reams their barrels to the wylde chamber. When I first got my 16" WOA complete built upper it took awhile, but I've worked up a load that gives 5 shots you can cover with a dime at 100 yards.
All of these strings were loaded with Longshot 180gr Hornady XTP
Here's the link I got the idea from:
http://www.handloads.com/loaddata/default.asp?Caliber=40%20SqqqW&Weight=180&type=Handgun&Order=Velocity&Source=
My own results:
Glock 22
1.125" OAL
7.1 1112
7.3 1133
7.5 1162
7.7 1186
Max is...
124 gr HST in NON +P.
Strangely, more penetration than the +P load with slightly lower kick.
It's all I run in my PM9 now.
+P is all I run in my G26 and G17 though with a slightly longer barrel.
I'd suggest running a hundred rounds through your pistol before you carry this load for real to...
Get a few extra decapping pins that are used to push the primers out.
Hornady will send these to you for free. But if you don't have a spare, you're dead in the water unless you can rob one off of another sizing/decapping die.
Get a few extra case retaining springs.
Both of these...
Awesome additions to your collection!
I wanted to make a visit to the CMP there in Anniston, but didn't have time when we were in town a few years ago.
We did however make it to visit the Bergman Museum. A MUST SEE for any firearms/history buff! I strongly suggest a trip to see the mans...
Loading for accuracy, I settled on 25 gr of H335 with Hornaday's same 55gr with range pickup and CCI 400 SR primers as well. Haven't chrono'ed the rounds yet.
Dirty
I'm an ex-Loctite factory rep.
Clean the threads with a residue free cleaner degreaser and let evaporate.
I like the liquids over the sticks for small screws and bolts-like those you'd find on guns.
Remember, we're trying to completely fill the airspace between the male and female...
I've been wearing my Crossbreed more and more lately for my PM9 and PM40, both with Crimson Trace, and I'm kinda liking the IWB because if frees up my right front jeans pocket.
Dirty
Handloads.com has some guys who have posted up some pretty stout numbers with 180gr. XTP nearing 1,200fps.
Seeing that sort of information piqued my interest so I bought a lb and started working up a load.
At a 7.7gr drop of Longshot out of a G22 I measured 1,187 fps. A G27, 1,131, and out of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.