Search results for query: *

I generally load Unique at about 5.0gr with 124gr bullets. I also load pretty short at 1.075 due to a shorter chamber. This runs all my guns Glocks and CZ's. The CZ seems that it will run a lighter load than the Glocks as I got down to 4.7 and had to lighten the spring in my G3 G17 to get them...

I just placed a order yesterday even though I know delivery will be a little longer. Keep making the bullets and don’t worry about the phone. Just leave a message on the machine stating longer shipping times.

For my 9 year old granddaughter I used 28g h4895 with a 95g SST. It shot extremely soft and was about 1-1/2 group at 100 yds. Never shot a deer with it but Hornady told me to keep the bullet above 2200fps and it would work good.

My reason is I get a better trigger in the Gen 3 and shoot them better. Really liked the feel of the Gen 4's but after having owned a few switched back to the Gen 3's

I would measure the bullets. I had some that measured .3995 and accuracy was very poor. Try some jacketed or lead Hy-Tec coated bullets from Missouri Bullets and look into better powders for a 10mm. Lots have already been suggested but I usually use Unique, Power Pistol, Longshot or AA#7 and...

Check your PM's

Getting ready to order could I please get the code?

This year for GSSF I was running 4.5gr Unique under a 124 gr Berry HP plated bullet. Cycled our Gen4 G17 good but son with a Gen 4 19 was having some issues. This was an extremely light load but I did not Chrono it.

I keep a Glock 30 in the glove box of my truck. 10 rounds of 45 acp 230 gr Magtech HP's. Also in there is 2 reloads with 230 gr XTP handloads. I like the 20 gauge H&R but would hate to cut the one up (had it for 40 years)that I have might have to look around and find one like it that has no...

We have one local shop that had AR's advertised for a Saturday sale for $799 on Thursday then when Saturday arrived he changed them to $1799. His store your choice to buy or not but if I had went after one for $799 and he told me sorry they are now $1799 it would be the last time I was in his...

I have a stock barreled G20sf. I load 155gr XTP's at 1350-1400 using Power pistol and have seen no pressure signs or bulged brass. I also have a G22 that I run almost exclusivley 180gr MO Bullets IDP#5 in the stock barrel. I purchased a LW barrel for it and discovered that I got more leading and...

My understanding of the Missouri law is that unless it is a lawfully prohibited place all that can be done is you can be asked to leave. If you do not leave then you can be charged with trespassing. Lawfully prohibited places include Post Office, Sporting events with over 5000 seats, Casino's etc.

I load for 3 .40 Glocks (22 Gen3, 23 Gen3, 22 Gen4) in all these my go to load is 5.4gr Unique under a 180gr MBC or SNS hard cast bullet. Leading is virtually none existant and it is a very accurate load. As with all loading data from the internet this is my experience and you should approach...

My son purchased a Savage 755a 16 gauge at a local gun auction and upon trying to shoot it we found it to have light primer strikes any suggestions? Externally the gun seems to be clean but we have not taken it apart to clean the firing pin.

Another good site for 10mm info is http://www.ar15armory.com/forums/10mm-Talk-Forums-f187.html

I have several Gen 3's and a 19 Gen4. I love the Gen4 it has been rock solid and reliable. I have never shot any factory loads in it but have shot some low powered reloads and while they do not extract very far I have had no issues as to stoppages. Mine has a couple thousand rounds through it...

I have used the IDP# 5 180's in my 10mm. Accuracy was very good. I was using Unique but dont remember the loading off hand. I also use the same bullet in my 40's with 5.4 gr Unique and it is as accurate and chronos about 975 out of my Glock 22. I have also run several boxes of the 140's in my...

I really like 5.4 gr Unique under a 180 gr MBC flat point. Runs 974 fps out of my Glock 22 and does not lead the barrel. Very good accurate (better than me) and not bad to shoot.

Sorry, Had not looked at this post for awhile. If you call them they will send you a drop tube that works with the larger plastic tube. It will work with 357 brass as I do use it.

My pet load for the 40 with 180 tcfp MO bullets is 5.4 grains of Unique, I chrono them at 974 avg. Good shooting load. With the 140 TCFP's I use 6.0 gr but have never run them across my chronograph. I have had no trouble with leading in any of my Glocks with these loads.