I like most here suggest start with a single stage or turret press.. I own 2 single stages, 1 turret and 1 progressive.. I also use every one of them.. Sure dillion is outstanding equipment but IMO not worth all the money. I own the LNL progressive from Hornady and love it.. There is a deffinate...
H870 is some good powder i only have about 15lbs left though :(... Another powder i miss is h570 and x283 down to 2 lbs each.. Another good subsitute for 870 is wc872 in my 6.5x300weatherbys the data is the same.. I look in every store i am in to try and find 870 but havent ran into any in...
The 45 LC case should not be fired in a pistol chambered for 45acp.. It will have a snug because of the lenght and aslo a 45lc case measures .480 at the base of the case ABOVE the extractor groove to the case mouth the rim itself measures .512.. ACP measures .480 on the rim and .476 above the...
Yup thats magtech brass and it is decent brass.. I have thousands litteraly mostly pistol and have no issues.. As far as you OD standard 243 is .276 and the 708 is .315 per ansi.. So you should be good to go.. You may have to outside turn them after your first firing.. Here is a pic of the...
You gotta remeber when you are sizing brass you are moving the brass into a new shape.. when you sized from 308 to 708 that extra brass moved down a little bit so there for you needed to turn your 708 die down slightly to bump your shoulder back alittle.. This is normal.. Also remeber the 308...
Yes you can do it that way.. Or you could just skip the inside neck reaming.. In 20+ years of reloading i have never inside necked ream.. I have turned the outside but never reamed the inside.. If your gonna do this make absolutly sure you dont mix your 7-08 up with your 243's.. I shoot all 3...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.