If pressure is pushing the brass back to the bottom of the primer pocket, why after multiple firings don't I get high primers? Same load in both guns. Is it that slight?
A friend of mine says primer pockets shrink upon firing. He uses a primer pocket uniformer on new brass before reloading. After firing he uses it again before reloading. He says he gets brass every time he uses it. Therefore the pockets shrink when the cartridge is fired. I say he is nuts. What...
I porchased a lighting system from:
WWW.inlinefabrication.com
It works good, and at the price of less than $30.00, a great buy.
They also have roller handles for many presses.
I have read about finding corroded ammo in spam cans. I have one with 660 rds of 7.62X39. The can is clean and undamaged. It is marked, "made to hunting specifications" No date mmarkings. Should I open it , or leave as is.
And how to open it? Have no key, and it look as tho a can opener will...
What is the best bullet weight for a Mini-14 with a barrel twist of 1 in 7? Have been loading for a number of calibers for some time now, and have decided to load for my Mini.
Thanks in advance.
I have plenty of IMR700X powder for loading shotguns. Was thinking of trying some for 45 loads. It's extremely clean burning. Listings run from 4.4 to 4.9 grains 700X for 45 ACP.
Has anyone tried this powder for 45?:confused: Will be use for plinking/targets in a 1911.
Thanks in advance.
Although I have loaded thousands of rounds on my Dillon 550B, I have never loaded for rifles. A friend has aquired a 550B and wants to load for .223 and .204. Any hints I should know that are extra for bottleneck case loading on a Dillon?
Thanks in advance.
Will be loading for a friend soon. What is your pet 7.62X39 loads for fun shooting, and/or accuracy? Any deals out there for surplus powder and bulk bullets for this round?
Have been loading for years, just not this one.
Thanks in advance.
I just use the standard RCBS two die set. When finished, I use a Lee taper crimp die to just snug the the bullet in the case. Have had excellent results in a M1 and my bolt action.
Will start loading 7.62X39 rounds for a friend soon. What is your favorite load for this caliber, for fun shooting, and/or accuracy?
Have been loading fir years, just not this one.
Thanks in advance.
Was talking to a good reloading friend of mine today, and he posed a question that I haven't a clue how to answer. He has no internet access, so I said I would ask the world of knowledge that you all have.
I didn,t have all the info when I first posted this, but here it is.
He wants to...
Was talking to a good reloading friend of mine today, and he posed a question that I haven't a clue how to answer. He has no internet access, so I said I would ask the world of knowledge that you all have.
He wants to neck size .223 down to .17 HMR to get away from the rimfire cartridges...
I just go to my LOCAL gunshop, who I have done business with for years, and buy any quantity of whatever I want. Ju st purchased 5M of primers. So it's a couple of bucks more, and that is ALL it is! Support the local guy! Especially when you can get whatever and any amount you want!
They can be reloaded. As said before, they will harden and split very quickly! Maybe even in the firearm! Just not worth it! Plenty of cheap brass all over the forums.
My 2 cnts.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.