Search results for query: *

Hi Guys, made my first 38spl loads.. (using in a 357 gun) cam pro 148g HBWC bullets (flat nose bullets with cone rear) 5grains bullseye powder med crimp, 1.470 OAL I had to guess a bit on how much powder since my book did not have this specific bullet..however the bullet box said...

Hi guys, so I am reloading 9mm and 30-06 now very well, and just got a S&W 19-3 .357 revolver and want to reload .357 and 38spl now. when reloading .357 and 38spl..do you have to crimp the shells to the bullets? any other tips for .357 and 38spl?

Hi Guys, so I tried my first 200 9mm loads and they sucked...95%+ did not eject I am using 124gr round nose bullets, with 5.8gr of HS-6 the brass kept getting stuck in the ejection port, to me it looks like the slide was not cycling back far enough.. 5.8grs was the lowest starting...

Started to reload 30-06 1=for a bolt action gun do you have to crimp the bullets into the cannalure? 2=comparing my loads to a factory hornady load I can hear my powder moving around in the case...vs the factory load the powder seems compressed...is it ok for the poweder to be moving...

one more question.... I have started to reload 9mm using 124gr round nose, cci primers, 5.8gr of HS-6 the lyman book says the overall length when the bullet is seated should be 1.075 which seems really short? all of the other factory ammo that I have is around 1.14 - 1.15 OAL the...

Hi Guys, I am brand new to reloading, was doing a batch last night of 9mm, 124gr with 5.8gr of HS-6 anyway I had to take the powder charge out of one of the cases and then i accidentally put the bullet into it, so it just has a primer. my question...does the primer have enough force to...