Search results for query: *

Bronco I worked for a company that had a FFL from the 1963 untill 1999. We were primarily an ag equipment company and sold these for varmint and pest control. As I recall, we first sold the .22 for around $15 and the .410 for $19.95 in the late 60's. I believe that Firearms International and...

handloading I use P. O. Ackley first but sure wish Sharpe was around to update his CGTH. I use Lee/Hornady to update modern powders. First manual was early 50's Lyman Ideal I got with old second hand press in 1956/7. I believe that there is something to be gained in all the manuals so I try to...

Friends and neighbors, Would there be anyone in this noble group that might have some experience building and shooting the 25-35 AI? Warmest regards, FFR

Model 59 revisted I worked for a gunsmith in the early 60's (that's 1960's) while going to Mississippi State University. He had a model 59 with a model 50 skeet barrel on it. He also had a key to the skeet club where we did testing. This was a great combination. With a little extra weight...

Headline of Drudge Report, " Proposed Ordinance in Idaho Town- asks Every House to have Gun". http://www.fox12news.com/Global/story.asp?S=5437033

I have found after more than a half century of loading that there is no end to learning. I strongly advise you go to the closest range and find someone there who will walk you through the motions. I know that every chap on this board would. I wish you were down in Dixie. There is nothing like...

Vickerman answered Thank you very much... site is just the ticket...

Friends and neighbors, I need a copy of the instructions for a Vickerman seating die. Marked 30 on side, it can seat bullets in 06 case easily and almost in 308 case as well. Die came with a machined gizmo which best guess is booster for something unknown to me. One end is drilled out and other...

thanks Thank you all for the help, I really appreciate it.... Ray

Fellas, I need some advice. I have a bunch of FA and TW National Match once fired cases. I want to load 150 and 180 grain. I've weighed some cases and the variation between mil and commercial is significant. Since most loads listed are implied for use in commercial cases, should I simply...

You ladies and gents with sons and daughters... Don't forget your cameras... when we are in the happy hunting grounds, your kids can show the pictures to their grandchildren and have their memories refreshed of a better time .... they'll never forget those times... I sure didn't...

shoot a slew of doves... ...soak breasts a while in basting sauce, wrap in good Tennessee bacon, slather on barbque sauce and grill indirectly over medium coals.... be careful not to overcook... these are small bites of meat and will be ruined if cooked dry... Personally, dove alone is not...

Hossdaniels, let me tell you... Son, you have to come west to the river (Miss). Not sure who's been cooking your duck and dove, but let me tell you, you just haven't lived till you had a woodie (old folks call em' summer ducks) with orange and apple slices or grilled mourning dove wrapped in...

thanks Bless you for taking pity on an old man, that's the one.

Might anyone in this distinguished group know the web address of a small custom casting company in Florida? Would appreciate any help.

DTA Sir. Believe the gent is referring to the difference in the threaded drop tube on the Lyman 55 and 7/8x14 thread size. The threaded tube on the #55 is the same as the old Junior dies. In order to use them or the 55 in a standard press, you had to bush the thing. There is a bushing...

FortyRodRay Friends and neighbors, I am a newbie but an oldie... should I error, please chalk it up to youth... My first real gun from my Dad was a Winchester bolt action, single shot, 9mm shotgun. I slew many bird of the scriptures (doves) with it. I was about six or so, and was selected...

A couple of weeks ago, someone asked about paper ammo boxes. When I was in business, I bought small part boxes off the shelf from these folks. Maybe they will have something useful. I still use a couple of sizes for pistol and shotshells. No partitions, just stacked and counted...

Folks, I am trying to locate a magazine for a Sako Finnwolf, a levergun in 308w. Barrel is marked vl63. Would appreciate any help.