Search results for query: *

Will look into this lead! Thank you! Reno

A friend of mine took his 410 apart, I mean completely, i have tried to put it back together for him but the trigger assembly seems to be missing a few parts, he says no he did bag all parts. Anyone have a diagram on the trigger assembly? I found one on steves pages and numrich but the trigger...

Only exterior is coated, no moving parts were coated except revolver.

Lol! Just might be! But as long as wife loves it, is all matters.

It was getting rough, p. o. never really took good or even moderate care of this or any pistol. Bluing was gone in spots, was going to remove rest of bluing and use high cut metal polish until mirror finish like I did my Ruger MKI, but wife did not like that so I thought of Duracoat, I did her...

I think i will try the file idea. That is the same guide I used before coming here, I have tore this pistol down 3x before going pink. The p. o. Broke the trigger spring and I bought a new one and reassembled it for him. Shortly after he feels a semi auto would be easier for him even...

Sure will, I removed both springs to make sure they were seated properly and they are, not sure yet, late here, will try tomorrow. Thank you again for your help! Reno

Here is what I just found, must have something not quite right. I guess another tear down and reassmbly.... Sigh

I have egg in my face! I had that spring in a small ziploc bag with all the screws, 5 bullets and yoke assembly set, I do this in habit since military, totally forgot it. Lol! But the cocking is still a bit hard, easy for me but not wife. The hammer goes all the way down and just that 1\16th...

I have damn near every bit of the pink out of there. I used a light coat of vaseline where I did not want pink but I guess I did not coat enough, lol! With hammer up the revolver freely spins, I can take a pin or screwdriver or whatever and easily lift the revolver stop, but to much movement...

I coated my wifes. 38 pink with Duracote and my daughter in laws Beretta Tom kat. I removed over spray in the trigger\hammer area and lightly lubricated the area. Everything wors as it should except the hammer needs extra pressure when it bottoms out to keep it cocked and the revolver stop...

From what I gathered, he took off his belt and holster, the holster is a belt thru hole type, or how ever you describe it, I believe people here understand the type I am talking of, but he placed it on the table for the moment so now his gun is pointing downwards at a angle, he went outside to...

I wish you all a Safe time During Hurricane Irma, I am in this with you as I am in Zephyrhills, FL. It is just as crazy in this little town as it is in yours, no gasoline, no water, no bread, plywood\food\generators are flying off the shelves, and Irma just may miss us or we get a direct hit, I...

Even if he was the sue you type, which he was raised differently, they have the pistol now, and if he did go to court and won, he might get the value of a 9mm bullet and one used table, so maybe 75.06? Still have not heard yet, they may just remill the frame and double check the hammer, I don't...

SCCY contacted my son they found some Quality Control issues with the hammer and will be addressing the issue, he may receive a new frame, if they decide on doing that they will inform him. So I guess one got by past QC. It seemed smooth to me, but I am no gunsmith and did not tear that weapon...

No, I did notice though if the safety is not fully engaged and the trigger is pulled back about 1/4 way and then if you push the safety all the way the hammer releases, so i'm wondering if something is wrong with the safety, at the range he did say he did engage and disengage it. It has been...

Maybe I should reload SD ammo like this... or just use this....

I could tell you about 3 different ways off the top of my head without thinking, one of them will give you one round silenced, but they all will get you in trouble, so I guess I won't say anything.....:) :thumbup: :rofl:

Well he only used distilled water to wash off the simple green and remaining crud, then immediately dried the parts and oiled them. I guess distilled water is better than tap because it does not have everything in it like tap that causes faster corrosion, that is why I use distilled water in my...

But guns were designed to kill period. So to use deadly force is just that, deadly force, so should not matter if it is a reload or not, self defense load or target load, under what I have been reading, if you shoot someone with a fmj or "target" load, then you were just wanting to mame and...