Search results for query: *

Hi,Lueckenhoff İts a simple 2 meters long steel tube with 2mm thcikness..And the end is wood,in the middle a Lot of old books,circled...And the front is fabric.Make the fabric wet before use,otherwise risk of fire!!!..İ have the use it because of some reasons...But i dont recommend that....

Hello drband... i made a video for you..with two rounds and fully assembled......The working prototype proof,that this lightweight ,thin slider with the integrated Hammer works and have benefits....İt needs improvement and fine tuning....So,it cant be more worse,only better... . Thank you

And here a very good video of recoil comparison...

Hello,and here the same with single Hand..

Hello,Here is a short video if firing..İs 200 fps...so its 8x slower..Not enough,but can gıive you a idea...

Respectfully I ask "what problems does your design resolve"? İ claim that my gun have low recoil and nozzle flip...No moving barrel,so accurater shooting..Low bore axis....Lightweight and thin....Easy to dissasemble....easy to produce,because of more polimer and less steel.... a good...

What cause to Felt recoil and nozzle flip ?: 1-Bore axis 2-Slider weight (Totally moving weight during firing) 3-Recoil springs 4-A god grip position Bore axis is 11mm..Thats very very low..The lowest i know is Striker one with 12mm Slider weight is the half of common guns İ have two recoil...

Sig Sauer P365 My Gun Weight 500 g (18 oz) weight 580 gramm / 20,5 oz Length 147 mm (5.8 in) length 178 mm/7 in Barrel length 78 mm (3.1 in) barrel length 110mm/4.3in Width...

The brass thickness is critical.....The counterforce for pressing the projectile in the Barrel is not the mass of the slider!..İt takes more then 30 kg force to press a 9mm projectile in a riffled Barrel..So,how can a 350 gram slider resist this power?...The answer is ^^Cartridge Wall Adhesion^^...

I don't see what this rather large heavy mechanism gains.[/QUOTE A glock 17 weights 710 gram......Glock use double stack magazine and the width is 30 mm...My design with double stack magazine is 27mm width and weights 600 gram... Heavy mechanism?

The biggest problem is,you couldnt test the gun!..İn this stage the only thing i can offer you,is show you the mechanic and my words..and i see that is not enough..İ tested some 9mm guns like the canik TP 9 ..My gun has less Felt recoil and Nozzle flip...A shooting video is necessary....İf...

The biggest problem is,that the casing sometime stuck in the chamber...Thats why i use 2 extractors...and it works...

The receiver acts upon point A. The blowback acts upon point B. The accelerated mass is connected in the point C. The gun in question, FAMAS, uses the same 1:3 retardation ratio. The distance between the projection of A and C onto the direction of travel is 3 times the distance between the...

Thank you ...My Goal was to create a lightweight and thin gun!SpeciallyFor people who needs to carry a gun all day secretly...And of course Shooting comfort and staying on the target ,was also aimed...Light guns tends to blowback very hefty....İ have the same model without grooves and the...

The Hammer rotates on a 4,5 mm diameter bolt..Wich connect the hammer to the slide..When you push the Hammer from the top 3 mm,the slide move 1 mm...in the same direction...

Its a 9*19mm...and shooting videos??.i will work on it...Thanks

The Recoil spring dont affect to much on blowback.Because of the enourmos speed of detonation,the spring will use contact with the slide and so the force will escape,for a short time...Thats why,trying to control blowback with springs is not very useful...İf the spring is to strong,it will...

The Dust cover is normally fixed with a pin,wich is removable with a stick...For video it dont attach it...But i dont like the idea to use any tool for disassembling..İ have another solution in my mind for that..Thank you...

İ dont know much about handloading and the advantage of that... The Case is not useable again,thats right...But i think,every case will expand a little bit in the chamber,will have signs from the extractor and ejector,and maybe little damage from smashing to hard surfaces.....İ wouldnt take the...

You are right.The cover normally have a pin,wich is removeable with a stick only..For the video i dont used it...But in the next version,i want lock the cover with the keypiece ..So i dont need a stick for removing..And there are no sights..thats right,too...This is a Prototype..Just to show the...