Search results for query: *

the round count was about 800 rounds, h4350 powder is what i use. the clr and bore paste, and carbon solvent for barrels with a good brushing and jagging, did the job. now the rounds rechamber and extract with no problems.

well did a good cleaning using clr, carbon remover cleaner and wipe out. the first pic is the before , the second is after doing the process 4 times over 3 hours. now to do it again tomorrow, and see what happens, but i think i got most of it. carbon problem. side note i have been loading too...

so ive been reloading my rpr 6.5 creedmoor for a while now with no problems. but started to have problems with trying to unchamber a live round. been having to bang the bolt handle with a hammer handle to extract a round. my ogive is at 2.20 using a 147gr eld match hornady round. but now i'am...

what grain bullet are you using i intend to use the 140gr eld and hornday say 41.5 is the max for h4350

i'm using a IBI 26inch barrel with a 1/8 twist on a rpr rifle

yea i dont have one of those been looking around but not liking the prices right now.

so i just put on a new barrel from ibi for my rpr rifle. now i need to start to load rounds for it.i am thinking 3 different rounds to load hornady 140gr eld match, hornady 140bthp, and sierra 140 bthp. i just used my oal gauge and this is what i got for the 3 140eld match 2.8420 140bthp H...

been trying the h4350 powder at 100yards works great but at 400yards i get alot of spread on the rounds. been using 140bthp hornady, with 40.5 grains to 40.8 grains. doesnt show any promise with the IBI barrel. i'am starting to wonder if i should start load testing the h4831sc powder or go back...

https://accuracyplus.biz/shop/reloading/accessories-reloading/hornady-lock-n-load-die-bushings-10-pack/

here is one for you guys need info on them i just got a 25 stevens short round in the box, and a box of .38 automatic colt smokeless rounds in the box. any info would help. thanks

hey guys i just got a new barrel in from IBI this week and having installed on my ruger precision rifle. 6.5 creedmoor. its a 26 inch barrel so 2 inches longer than my old one. i was using superformance powder and shooting 140grain bthp rounds but have been told that h4831se powder works great...

i have hornady and other books but they dont show 40sw.

i have titegroup powder for them any idea how much and what to oal should be?

this is what is on the bag. 10mm/40g 180grain fcp rn. or is this the wrong stuff for 40sw??

what do u mean fmjrnfp??

round nose

i'am just starting to load 40sw 180fmj rn . for a friend. i've got titegroup powder and all i can find is 1.125 ocl and around 4.2gr of powder. anyone else know about titegroup for 40sw????

iam looking at H4831 SC for the new barrel i'am buying from IBI barrels out west. i find i'am having trouble with my powder measure liking h4350 jams up alot and get alot of overpour.

morning got a question, have been using superformance powder for my creedmoor 6.5 with 140 hpbt serria, but getting hard to find. other than h4350 is there any other good powder to use. just bought a new barrel from ibi barrels, and would like to know what everyone else is using