Search results for query: *

Hello Can anyone give me 3006AI data for H4350 and Varget using 130ttsx? Either book or quickload Thank you

Those wondering i tested the 130grain load 56 grains has no pressure signs 1 - 3170fps 2 - 3179fps 3 - 3182fps 4 - 3182fps 55.5 grains gave 3112fps (1 shot) Starline brass AR2208/Varget powder Federal Match primers 1" group 100m

Can you please also do 150ttsx with h4350? Only if it isnt too much trouble

Thabk you all helps alot Thanks p flados for that info I loaded them up and going to work up slowly in 0.3g from minimum of cup and core hodgdon 49g till mid barnes 55g

Thanks for the replies. I always start on bottom and work up slowly in 0.2grain increments. I am more cautious than the average person. I will just work up more carefully perhaps in 0.1grain increments? and see if I can see a difference from primer to primer. This is going to cost a alot of...

Does anyone have any software that can calculate the pressure of 130 TTSX with 56.5 grains of varget/AR2208 And also anyone have any software that can calculate a start charge for H4350 and 130grain ttsx?

Ok this is my error fir not being clear ADI makes the powders varget and H4350 for Hodgdon. Hodgdon just rebrands them. They are tested at ADI, by the manufacturer ADI in Australia. Moving on... Il boil it down to one question, has anyone tried H4350/AR2209 - in a 3006 with 130ttsx? Gavin...

I meant h4350 is the same as ar2209 And varget is the same as ar2208

I have done hours of reading on forums about this and can not find anyone who directly addresses it. This is concerning H4350 (AR2209) and Varget (AR2208) powder and 30-06 cartridge. These are identical powders as confirmed by ADI. Barnes 130 TTSX is listed in Barnes 53.5g 3050fps - 56.5g...

Sweet thanks guys!

How many rounds does a 1911 springfield loaded 9mm last? I bought it and dont want to shoot it much so i dont wear it out, so I will be conservative with use. Ive been told by guys at range i should expect it to last 5000 rounds before i need to replace parts like slide, springs etc have you...

One more question, how many rounds in 9mm before barrel needs replacing?

Sweet. As per a comment, I sent the SN to Springfield and they told me its date of manufacture and details that it is in fact a Loaded. Thanks guys. Regarding the guide rod, i saw alot of complaints about it so I bought a Nighthawk custom guiderod with plug.

Hello all, I see a lot of Springfield A1's for sale that have "A1" and "loaded". I like the features of the loaded, and have handled one. But I also see some 1911's that are identical, adjustable trigger, full length guide rod, extended beaver etc but have "A1" on the slide instead of...

I have 2 cz 550s in 3006 ebony editions - u can not compare thia to a ruger. Even my brothers 308 varmint cz 550, the bolt weighs 180grams more than the rugers bolt (very similar dimensions), claw polished to mirror, and very smooth to cycle. High gloss steel mag plate and trigger guard...

I didnt fire it as i noticed these issues soon as i got it. Incase uissed it, i couldnt check it out before buying it where i live. The supplier issued the refund, not sure how it works between supplier and ruger. I have seen a few winchester supergrade 300wm very nice rifles, really couldn't...

Just providing an update. Got a full refund. Off to a Winchester Model 70 or CZ 550 (if i can find one).

You really didnt read anything past "investment casting"... so you read investment casting isnt as strong as forged steel, have a stroke and type this out.... If you bothered to read, (hopefully you got this far) i expect ruger to put moe effort finishing when using a cheaper, quicker method to...

Yea seems i got a lemon. Given most votes people have got better examples and comments show this.

Stuck? Not at all. Buyer beware mught be the policy in the states but not in Australia. See our consumer laws lean heavily on side of the consumer, especially since their federal reform. Without going into the details, i have an option for a full refund if they decide it cant be repaired. So i...