Thanks all. Made ladder loads with HS6 of 6.9-7.3. Minimum PF was 150. Too high for minor. Will def try to lower the powder and ladder up with 6.5, 6.6, 6.7, 6.8 and 6.9 to see where I'm at.
Found nothing specific on this gun plus AA7 for minor. But I am currently shooting 10.3gr of AA7, over 115gr CMJ, loaded to 1.165" with a 10lb spring, yielding 169 PF. I'm now looking for some feedback on a minor load (125-164PF) with a czechmate and same bullet and powder. Also looking for...
Ok, so today I went back to the range for another round of tests. Seems like I'm spending so many bullets and powder just in testing!! It's crazy. Ok, to the point, I used my Czechmate with AA7 in all loads and loaded up to 1.165". Mixed brass.
124gr CMJ: I tested 9-13lb springs on loads of...
Gonna be shooting my first state match, but was wondering about the jerseys. Does the match provide you with one as part of the fee? do they sell them there for those interested? or does one have to get them online? thanks
Ok, so this is my situation: I load for 9mm major in the 1100 and the press is dedicated for this. I also have another recipe for 9mm that I shoot with a carbine in competitions. This is done in a different press. I am getting a Mr Bullet feeder for the 1100 and was thinking of reloading both...
Livelife, I made a couple of videos about mine as well. Even a short video about a problem I had with the primer return spring. I kinked it. But damn, your post is awesome and completely thorough. Thanks!!
Bought a PSA GEN4 8" 9MM 1/10 GX M-LOK MOE EPT SHOCKWAVE PISTOL without realizing the importance of having the bolt hold open feature. Trying to use the carbine for competition and it’s very cumbersome without this feature. My question is, is there a way to get that one part and install it or do...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.