Search results for query: *

Mike

I use WW 296 for the 629 S&W dedicated a deer hunting load to Joe a former deer hunting partner [he passed in 2006] it was a classic load I call it ''Head Bangers'' loads[primers marked with red paint] loaded 4 target 44 mag and 2 Head Bangers for Joe ,,he limp wristed the first 4 and #5 got him...

Beagling a mold to make the casting a little larger take shim stock and slice a small strip off .[001-.005 thickness] then wrap it around the bottom of 1 block of the mold to space the 2 blocks apart makes the diameter a little larger then size to make it round again Mike

use to shoot the 429421 KT cast for pins a mid range load works the best because it does not leave splinters on the table full house loads usually leaves the bottom of the pin on the table and the rest splintered to pieces best time was 6.5 seconds from the holster to last pin hitting the...

yes RCBS Cowboy dies in 38 S&W got to spend some time sorting out the mess either its the expander die or the sizer die run the brass threw the steps the shells wont chamber I used a hand flaring tool and tap it a bit to flair the mouth large enuf to start the slug load the cast boolet and...

first mold I have is the 38-150-KT an RCBS worked great in my model 19 S&W right now I am running ideal 38 HBWC and 44 HBWC for target shooting would be nice to have a section on cast boolets here

have you started therapy yet ?

just seen the picture totally different from mine went in the front on me

I had C3-C4 done in 2011 recovery took a long time but was able to putz around in the loading room just move slowly because things are not the same as before are you still wearing a collar to restrict movement? and are the staples out Mike

what I do is take a similar lead bullet weight and match the starting powder charge the 6.0 gr of unique is reduced from the recommended starting charge of 8.0gr I am looking for around 550-600 FPS for punching paper with this HBWC ill adjust the charge to get the most accurate round

Ive got a ideal mold that drops them at 225 gr no data is available I am starting at 6.0 gr of unique for target loads Mike

did they give out lot numbers?

delete

HBWC'S in 38 S&W , 38Spl. and 44Mag. for target and pig processing Mike

thats what the on line help told me wen I asked them Mike

they dont offer a holster for the S&W Shield in that package ended up with the Cross Breed belly band 2.0 package works great Mike

I have a S&W Shield in 45 ACP for CC a Cross Breed in side the waste band works great but prints a little with T shirts/Polo shirts went to the Cross Breed belly band 2.0 and it conceals 100% so no one knows I am carrying at church doing security biggest disappointment is the pockets for the...

Tinman can you elaborate a little on the ''pencil eraser'' mod ??? I never heard of this one Mike

FYI #1 buck shot in 20 ga will only be 2 pellets per layer use to reload #1 in 20 ga for my trapping partener and girlfriends dad the pellets come out in pairs about 1'' apart in the pattern they really will flatten a deer at close range out of a side by side Mike

I am finding the same issue with loading 38 S&W 1.7 gr of red dot is a beam scale job and powder trickeler only good thing is its for the ''pig popper'' used in processing pork dont need many rounds Mike