Search results for query: *

Nice work. How long did it take to do a piece like that? Jim

Savage 10ff in 308 with a 165 gr sst over some varget. Jim

Check and see a the rim got ripped off a shell and left the casing stuck in the chamber. this would keep it from chambering. also double check and make sure you you have the correct ammo for the rifle. Jim

Savage Mk II or a EAA Biathlon basic if you can find one. Jim

I started out the same you are and bought a used Pro 1000 and later added a lee classic press. I started on my turret as a single stage until I learned. I am a big fan of Lee equipment in general and I have mainly lee dies. There is better equipment out there, but value for money they are hard...

nice piece. congrats. I ahve a very similar 1918 colt with original finish. It is one of my favorite pistols. Jim

Currently a 590A1 with #4 Buckshot, my glock 27 on my side of the bed. The pistol may alternate with my GP100 or P13 and P14. On my wife die of the bed a S&W 642. I keep all my HD guns loaded with safeties on.This is augmented by a 90 lb Australian Sheppard mix. Jim

If not go for a 20 or 25 MOA mount. I think Tac-sol makes one for 35.00 at Cabelas. I like the scopes but the cross hairs are a little tick for precision target work with 22's If I am wanting to really shoot for groups. Jim

I have one on my Savage 110 tactical until I can afford better glass. It is a good scope FOR THE MONEY. After zeroing I set the locking rings in the turrets. I was deer hunting i my stand. A old flat bed trailer. I stepped of the trailer to take a leak, and it shifted and my 10fp took a spill...

Shop around. Centerfire had some that were cut down to a "para trooper model". 18" barrel if I remember correctly.That would save you the hassle of doing it yourself. Jim

Another vote for 3031. I have had good results with 150 and 170 grain corelokts in a 336 and model 94. Jim

There is also the Sierra factory in Sedalia missouri. A little out of the way but it would be a cool side trip to do the factory tour. Jim

Mine is pillar and glass bedded front and rear. in the front about 1 inch in front of the v-block. bull barrel free floated with an adjustable v-block installed to prevent barrel drop in a boyds blaster stock. Mine shoots very well. There are two schools of thought on the free floating vs...

Graf and son off of 5th st in st. charles just off of hwy 70. Best reloading shop in the area to hit. good stock of powder and primers though large pistol are a little thin right now.There are other shops but that is the best stop for reloading. There is also the cabelas a few miles away that...

Always my first stop is here. After that I'll wander around the forums. Jim

Where to start, lots of projects. 3-4 glass bedding projects Install barrel on turked k98 re barrel sported swede mauser finish restoring sporteized enfield No 3 and refinish stock collect parts to finish Ar-15 built on cmmg lower two iver johnson pistols to try and get in running condition...

Try C&S Metall werkes. Call first. they have odd hours. http://www.csmetall-werkes.com/services/ There is also Bill's gunsmithing in silex off of 40/61 past wentzville and troy. Bill is a good guy and smith. Try calling him and ask. Bills Gunsmithing 76 Straube Rd Silex, MO 63377 573-384-6395

45-60 351 winchester 7.62 nagant 7.65 argentine mauser I have others calibers but these are my more obscure-ish ones Jim

Out of my three I have used, varget, IMR4064, and IMR3031... Varget has been the best so far especially with the Horandy 165 gr SST's I use for Hunting. Jim.

He carries a lot of used guns. Good prices. I have bought a lot of guns from him. Really good guy as well. Has a wide variety of guns. Jim