Primers and Cast Bullets are Falling off the Shelf here at my Local Dealers in Kentucky.
Lead Bullets are $35 PER 500 AND Primers are $28 a 1000 and $34 at the other for Winchester or CCI.
I jumped on Wolf Primers for $90 a Case (5000) and have since I load "Plinkers" with Wolf and I Save the...
H110 with 125JHP's gets like 16% compression running 21.5gr's (.357 Mag)
This Load Chrono's 1545fps from my 4" GP100
I like 2400 also but unless you run near the upper end there will be unburnt powder.
'Nitro
I dont know what your Basing this upon but 21-22gr is the load Hodgdon recommends. Reduced a Maximum of 3%
In My Opinion this is Bad advice.
PP49 I'm Not discounting that this Load Works for YOU. Someone else's Combo Might not like that Load.
No Disrespect,I'm just Giving my Opinion..My...
My Fav. Loading I do is with H-110 and 125gr Jacketed Bullets.
I would Use the Hodgdon Data.
I had some Loads using 21.0gr of H-110 that "Sounded" Flat compared to the Big Flash/Bang of a Load that Ignites Correctly.
I verified this after a few shots by shooting some over my Chrono.
FOR ME, in...
Looks good to me.
My Fav. "Plinker" load is 3.8gr of Unique under a 158gr Lead Bullet.
My Load,My Gun (Mod. 10) runs 710 fps avg over my Chrono and shoots POA at 25yards.
YMMV
'Nitro
I Tumble my Ammo AFTER i reload it to remove and Case Lube and to Give a Final Polish on ammo that I care about looking good.
Tumble Live Ammo at your Own Risk..YMMV
I have been doing it for Years. <-----Which means absolutely Nothing!
'Nitro
I'm buying 5000 from wideners this week in a Group buy at work. I think we are ordering 40,000. The locals who use them like them. I'm going to use them for Plinking and use the rest to build Ammo that might be used in Serious Social Intercourse.
'Nitro
My Go to .40 powder..Hands down
I have used Bullseye,Red-Dot,Unique,Blue-Dot and 2400....I keep reaching for one over and over..
Man if only I could use H110,I would drop all them in an Instant.
'Nitro
Left is Stock Gen3 Glock G23 Barrel
Right is a Lone Wolf Dist. (LWD)
I marked the Cases with Red Sharpie to ease Viewing. Notice the Ramp angle Changes to add support.
The LWD Chamber is .004" Tighter then the Stock Chamber as Measured with my Dial Calipers.
I have no Feeding issues with the...
Jeez Slackers..No Pics Yet..
Fine I'll Bust out one that was thrown together for a quick shot...I have got a ton of comments and 2 people that I know of are using it for a Background on their computer.
678 rounds I built for Wifee's G27. She likes the Pretty Bullets.
165gr FMJ,Nickel...
I agree with Above....H110 w/Magnum Primers will Rule the Roost In My Opinion. I Shoot Lead Bullets with H110 and I get No leading. Being that you have Jacketed Bullets I personally would use those for the H110....
H110..."Pedal to the Metal" or Nothing...
'Nitro
Well First of all I have "Downloaded" Hardcast Bullets before and I have had good luck.
www.alliantpowder.com
There is Load data for a 246gr LRN bullet there for the 44spcl. The Non Magnum round for that caliber. I personally would have no issue using that data to get a Baseline.
Dont...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.