Search results for query: *

Setting up my new LNL and seem to be having a bit of problem with the shell plate sometimes stopping just short of the next detent. I seem to have mostly fixed it tweaking the pawl adjustments some- they are touchy, 1/4 turn of the screw makes a big difference. So here is my question- I notice...

I have .308 Rem 700 Varmint (Dick's Special) with the heavy barrel. Accuracy is poor and I have tried a free floating "sniper" stock, no joy, and a deresonator which helped the most. Since the barrel is 26" I'm thinking of having it cut and recrowned to about 20" to see if that improves...

Went to visit handgunlaw.us and it seems there is some issue with their hotlinks that basically makes their site unuseable.... Anyone shed any light on this? Planning a multi state trip and need that info!

I have a 629 5" and a 329 NG snubbie. I've noticed that on the 629 a .44Sp hits about 2" lower at 50 ft. than a .44M. On the 325 NG it is about 6" lower, same ammo same distance.. Only thing I can figure is the 325, being much lighter recoils up significantly more than the 629, causing a...

Today I finally located a .223 American to pair up with my .308 American. Decided to run some dummy round/snap caps through it. Uh Oh:( Last round in the magazine will not feed, as it tilts up headed for the chamber the back end drops down out of reach of the portion of the bolt that pushes it...

2 Tommy Guns swapped for 88 Bushmasters WOW! I'd have thought they might be worth more than that.. http://www.foxnews.com/us/2014/01/08/sheriff-swaps-bonnie-and-clyde-era-tommy-guns-for-new-arms/

I already own M92s in .357 and .45 Colt so I sprang for one in .44mag to complement my recent purchase of a S&W 629. What a let down as I went directly from my FFL guy I had it shipped to, to the range. First the lever wouldn't return all the way home. Inspecting the plunger that has a 45deg...

Just saw on the evening news PTR is moving from Connecticut to South Carolina! Anyone know where exactly? They said many of their 140 employees would be coming with them.

Back in November 2012 I bought an American in .308 Excellent shooter BTW, way more accurate out of the box than my .308 700 with the varmint/heavy barrel. If they ever make one in .223 I'd buy that too! Ruger had a deal going where if you registered it online you got a free cheek pad. One was...

So I wander into a WalMart 55+ miles from me and spot about 6 or 7 ARs in the rack- Bushmasters, Windhams, and Colt. Had many more in the back they said. In a weak moment I decide to grab a Colt LE6920 with FDE Magpul furniture, wanted to see if all the Colt hype was true and whether it will...

Picked up a new S&W 629 .44mag 5" today. Ran by the range for a quickie this evening. Not good. Shoots about 2" left at 25 ft with rear sight all the way to the right, any farther and the blade would be hanging out of the slot.. I don't think it is me flinching as I also have a .45Colt and...

http://www.wnct.com/story/21802603/homeland-security-seizes-hundreds-of-counterfeit-gun-accessories-in-cary

Went to try out my new Charter Arms Pit Bull 40S&W revolver today. Had a little more kick than I anticipated, and grouped ok, but a little low and left. The low can be corrected filing the front sight down a little, a common thing I've read with CA revolvers. I can live with that, filing down...

I just got in two Korean made Glock 40S&W mags from CDNN. These are 31 round capacity and were actually bought for my KelTec SUB2000(40S&W). I cannot get more than 4 or 5 rounds into either mag! They just completely jam up. Email dispatched to CDNN to see what they say.... Anyone else...

I really like my SP101 .22 4". In the pic the large rat had done a number in the engine compartment of my truck, stripped a lot of the insulation off the fender wells and hood, chewed a few wires, gnawed a hole in an expensive silicone turbocharger duct coupling. I thought I was dealing with...

Been trying to figure out why my Dick's version .308 700 ADL Varmint shoots so poorly. 3-4" groups at 100 yards with any ammo I've tried. My Ruger American in .308 will shoot groups with the holes touching. A buddy loaned me a Choate Ultimate Sniper stock to try. Went out to shoot...

Loading up some .308 today I noticed some of the Federal Large Rifle Primers had too much of the red marking paint on them. Some of it had almost plugged the flash holes and on a few it had run down into the primer cup itself through the holes. I'd already loaded about 35 before I noticed...

Got one last week, the SS version from CDNN. WOW! Works perfectly and fed/fired 4 different types of el cheapo bulk box ammo. Did have one problem on arrival..it would not eject an unfired round. Looking at the adapter the slot for the extractor wasn't milled deep enough, no way the...

Well back on the 9th I ordered from Starline 500 9mm brass due to ship on 9-25 and 500 380 brass due to ship on 9-29. Got the 9mm last week ahead of schedule. Sent an email today inquiring about the 380, they now say mid-November:cuss: That would be bad enough but I rounded up 500 FMJ...

Barska Green 5mw laser- any good? Model AU10982. $69, lowest price I've seen on a full power rifle laser.