It sounds to me like you should get a set of calipers and a micrometer and measure your brass before sizing. All bottle neck cases must be lubed even if you are using carbide dies or steel dies. Neck sizing dies do not need lube. Check if your die is a neck sizing die and track down one of...
Many reloaders will use a hotter magnum primer in very cold conditions,like our wyoming winters, They use standard book loads just switch to magnum primers in winter and standard LR in summer.
Years ago I bought 50 lbs. of Bullseye and I have shot lead bullets almost exclusively lead projectiles Most were for our local bowling pin shoots I used up 6000 185gr LSWC and ran out of them this year and need to resupply after I run out of Berrys 185 gr plated hollow base round nose. I...
Lee makes a reasonability priced 50 BMG reloading kit. The kit does not include a case trimmer but they sell one for like 20 bucks + a cutter head about 10 bucks (works with other calibers)
I bet the expense of your rifle and ammo is high and I understand having a new toy and using it less...
Well I live in Wyoming and I would like to welcome everyone to Yellowstone National Park. Wyoming is a Proud Premitless carry state now! If you can buy it you can carry it with few limitations.
For the best overall lenth for your rifle
take a cleaning rod in the muzzle with the bolt closed on a empty rifle and mark the rod at the muzzle
next put a bullet in the bore and hold it tight with a pencil eracure end and
place the marked rod in the muzzle and remark the distance between...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.