Search results for query: *

I am trying to find a W231 load for my Ruger P95DC and X-Treme 115 HP plated bullets. I have loaded 4.2, 4.3, 4.4, 4.5, & 4.6 at 1.050 OAL, mixed brass & CCI 500 primers. 4.2 & 4.3 make it a single shot. Using a rest, targets for 4.4, 4.5, & 4.6 look a lot like I used a shotgun. I used...

I just got a Rangemaster 750 on sale at Midway for $45. Still on sale as of now. QUESTION: re: warmup time - does anyone leave it "on" all the time?

Quote from a different thread: Another_Kelley said: Some or most of you may be aware of this but I just learned and was so blown away I had to share.... You only pay shipping on back-up/replacement parts. http://leeprecision.com/auto-bench-prime-parts/ Thanks for the heads up on this. I...

I loaded a few rounds of 45 ACP today: LEE TL452-230-TC over 5.0 grains of W-231, OAL 1.205, CCI LPP & Mixed fired brass. The fifth round did not go fully into battery and now the slide will not eject the round. There is nothing in the barrel and the gong rang four times. I think this...

I would like to know the width of the primer tube slot (not the length) and also the diameter of the powder measure insert hole. Inline Fabrications Hornady 5 hole die holder with shellplate slot, black powdercoat. Thanks, Mike

I need several volunteer SME's to proof read this reloading overview handout for the Target Audience, "Uninitiated Reloading Students." Please consider these points: This is intended to start the discussion on reloading processes. It is intended to be an introduction to a complex subject for...

I am preparing to teach my adult son and daughter to reload, and I thought I would share a document I wrote that describes my current pistol reloading process. It combines a visual flow chart with concise text visually paired to the process steps. It is for visual learners :) Knowing nothing...

Black label can = Win 231 White label can = HP-38 Both one pound cans were filled on March 07, 2016 Both have the same batch number - 2448 The clincher... both have the same defect in the second '0' in the date I'd say that these two cans of powder absolutely were filled on the...

Please vote. I don't mean to be divisive in asking this question. Most poll questions seem to want to lead you into a response. To be clear, I am simply trying to understand the large differences between the number of thread views and the number of YouTube views. It makes it look like a lot...

I finally gave in to the "off-press priming movement" sweeping the forum. I have removed the priming attachments from my LNL after using the LEE bench primer one time. It's like butter, and I don't see going back to press priming, even if I decide against the LEE for some unforeseen reasons...

I can now report that the 4" PVC homemade replacement drum I made can hold a load of 475 9mm cases, and still clean well too. I set the max load by weight, and 4 lbs is the magic number. I don't know what the number or weight of 45 ACP or 38 Special cases I can fit in will be, because I have to...

I made a modified drum for a 6 pound harbor freight rock tumbler out of 4" PVC pipe. It's nothing special, but I made the end cap of clear plastic so I could see the agitation. I thought you might be interested so I posted a slow-motion video. No talking, no music, no personality :-) just the...

I tested these two units today, and I am posting the results here. This was not scientific or rigorous in method. Just a few 22's over the end-to-end units. I don't know for sure what the ammunition was, I just used what was in the magazines. Could even be mixed. I did remove these from the...

I am working up a load for the PROMO Hornady 185 gr XTP's I got back in 2010, and I am finding that my chrono readings are low. New Starline brass CCI 300 LPP OAL 1.225 5.8 gr/733 fps [850 fps/5.9 gr Published data] 6.4 gr/819 fps [900 fps/6.3 gr Published data] 6.7 gr/871 fps [950...

I run my brass through my LNL-AP to de-prime before cleaning. I am interested in putting a trim die in station 4 to check for long cases at the same time. I'm talking about the case-hardened die that you use with a file to trim the case flush with the top of the die. Are these satisfactory...

These pictures show why I like to uniform primer pockets. (See updated picture in post #9) In the row of 5 cases, the first three cases have stock primer pockets, and the last two (on the right) have been uniformed. My high primer problems have vanished, and I now have no issues priming on my...

Hornady Bullet Feeder Die Lately it seems the craze is to use a Hornady bullet feeder die without the expensive motorized bullet feeder assembly. I have drenched my hands in gasoline every day for thirty years, and my fingers work about as well as you might expect. As a result I look for any...

I didn't find any posts on this other some older threads that didn't mention specific homade solutions, so I am posting this YouTube link about an LNL AP primer tube filler I made yesterday. http://www.youtube.com/watch?v=7TwTJeX-65I I hope I'm not duplicating someone's info here :uhoh...

you've all been waiting for. :neener: Sorry, I couldn't resist after the resounding lack of interest my original post generated (and here I am wasting more of your time and bandwidth :)) For what it's worth, the original thread is here: http://www.thehighroad.org/showthread.php?t=500834...

I am thinking about buying the $50 ProChrono Digital PC Remote software. My searches of the archives make me think nobody uses this accessory program (or they don’t post about it). I don’t intend to use it as a range display since I shoot in the backyard and I don’t have any problem calling a...