Search results for query: *

6x48 thread x 5/64" = front bead 3x56 thread x 5/64" = middle bead

I just bought a used 11-87 serial number PC******. I THINK the date of manufacture is 1995. It is a Premiere model with the light contour barrell. The front sight is busted, and the middle sight is missing all together. Both are getting replaced one way or another. I don't want a magnetic type...

looks like all is well. the trigger and safety resets just dandy. i read about peening the safety, but you are the first (that i've seen) to mention this other method. hope this tread helps someone. thanks again.

1911 safety; problem solved! last post on this topic. the actual problem was the back of the trigger block was not coming into full contact with the grip safety arm before the trigger released the sear. this is solved by using a punch to create a dimple on the back side of the trigger block...

Thanks guys. There is no signs of ware on any of the three safety arms. The sear spring is functioning correctly to the best of my knowledge (I bent it a little any way). When lifting up on the tang, trigger pull requires slightly more pressure to drop the hammer. I can feel the back of the...

I installed a stainless Ed Brown grip safety on my SA 1911. Functioned correctly for approx. 1000 rounds. At some point, the trigger began to fall when grip safety was not depressed. Wanting to get away from stainless, I bought another Ed Brown, this time in blue. New safety, no fitting, and...

Brown polish vs. Neutral polish.... Is there a difference other than color?

Thank you Jimmy. I stand corrected. This is why my local LEO will not issue a CC permit to a person under 19 y/o. Section 26-1-1 Age of majority designated as 19 years. (a) Any person in this state, at the arrival at the age of 19 years, shall be relieved of his or her disabilities of...

It is currently true that an Alabama resident has the right of attaining a concealed carry permit after his or her 19th birthday affording it is legal to own a concealable weapon. It is unlawful to deliver a 'pistol' to a person 18 years of age or younger. I haven't seen any other Alabama...

I Just bedded a new Farrell Base to my 700sps. Actually I did it twice. Turns out that brown colored Kiwi shoe polish tends to pull half of the bedding compound from the scope base. People have a variety of options when choosing a release agent for JB Weld. I used Accardo silicon based fly line...

Thank you much. I have been looking for long center bits and screw extractors, but haven't been able to find any long engough. Besides I'm not convinced that it would be possible for me to drill the bit out anyway. Even in a vice. It is definitely lodged in the head and is not mild steel... I...

I bought a Buckmark 5.5 target with a problem. It has a torx bit head broke off flush with the takedown screw. The screw is recessed and clearance for a power drill is a problem because the barrel is in the way. I don't wanna scratch my baby! Does anyone have a suggestion on how to remove the...