JP1954
Member
I have been having a problem with stovepiping and/or not locking open after last round of magazine. I also noticed trouble extracting magazine. Upon investigation, I noticed when the malfunction occurred, the magazine spur(or whatever the part that engages the slide stop is called) somehow winds up on top of the slide stop spur (or whatever it is called.) I disassembled the gun and noticed that the "slot" in the slide stop spur is wider than the wall in the slide's slide stop notch. Also, while running through some extraction cycles with a spent shell casing, I noticed the times it failed were the times the slide stop was 1/2 - 1 mm out from flush against the frame. I think the slot in the slide stop is too wide and that is causing the problem. Has anybody else here had this problem?